Valtra M Series 120e 122hp (90kW) 580Nm — Stage 1 file (+24 hp)
hp
Stage 1 file for Valtra M Series 120e 122hp (90kW) 580Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra M Series 120e 122hp (90kW) 580Nm ECU
Valtra M Series (I) 120e 122hp (90kW) 580Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 122 to 146 hp (+24 hp, +20%) and torque from 580 to 722 Nm (+142 Nm).
Valtra specialises in tractors built for Nordic conditions. Valtra is a Finnish tractor manufacturer, founded in 1951. Valtra is part of AGCO Corporation. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Valtra среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What power gain do you get after chip tuning the Valtra M Series 120e 122hp (90kW) 580Nm?
After Stage 1 the power of the Valtra M Series 120e 122hp (90kW) 580Nm rises from 122 to 146 hp, a gain of 24 hp (+20%). Torque rises from 580 to 722 Nm (+142 Nm).
How does Stage 1 differ from stock on the Valtra M Series?
Stage 1 on the Valtra M Series 120e 122hp (90kW) 580Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +24 hp with no hardware changes.
Is a Stage 1 remap safe for the 120e 122hp (90kW) 580Nm?
Stage 1 on the Valtra M Series 120e 122hp (90kW) 580Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Valtra M Series 120e 122hp (90kW) 580Nm?
Stage 2 on the Valtra M Series 120e 122hp (90kW) 580Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Valtra M Series?
Stage 1 on the Valtra M Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Valtra M Series 120e 122hp (90kW) 580Nm done?
The full remap cycle for the Valtra M Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Valtra M Series?
The original Valtra M Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Valtra M Series 120e 122hp (90kW) 580Nm?
The cost of Stage 1 for the Valtra M Series 120e 122hp (90kW) 580Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.