Toyota Verso 2.2 D-4D 150 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Toyota Verso 2.2 D-4D 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Verso 2.2 D-4D 150 hp ECU
Toyota Verso (2011) 2.2 D-4D 150 hp — mass-market diesel engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 150 to 190 hp (+40 hp, +27%) and torque from 340 to 420 Nm (+80 Nm). The 2011 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
GR (Gazoo Racing) is Toyota's performance division (GR Yaris, GR Corolla, GR Supra, GR86). DPF/SCR with AdBlue is standard on Euro-6 Toyota diesels. Mid-range Toyota diesels are a high-volume chip tuning subject for pickups. Toyota's diesel range is aimed mainly at pickups and SUVs (Hilux, Land Cruiser).
Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). Stage 1 on Toyota diesels delivers a noticeable torque gain, ideal for pickups. The GR models (Yaris GR, Supra) have a growing tuning culture. Mid-range Toyota models use high-compression naturally aspirated engines, so Stage 1 yields a modest gain. The locked Denso platform requires a dedicated tuning toolset.
Frequently asked questions
How much does the power of the Toyota Verso 2.2 D-4D 150 hp increase after Stage 1?
After Stage 1 the power of the Toyota Verso 2.2 D-4D 150 hp rises from 150 to 190 hp, a gain of 40 hp (+27%). Torque rises from 340 to 420 Nm (+80 Nm).
How does Stage 1 differ from stock on the Toyota Verso?
Stage 1 is a software optimization of the factory ECU firmware of the Toyota Verso with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.
What is the risk of Stage 1 on the Toyota Verso 2.2 D-4D 150 hp?
A remap of the Toyota Verso 2.2 D-4D 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Toyota Verso 2.2 D-4D 150 hp?
Stage 2 on the Toyota Verso 2.2 D-4D 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Toyota Verso remain valid after Stage 1?
After remapping the Toyota Verso, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Toyota Verso?
Reading and writing via OBD takes 25-30 minutes on the Toyota Verso. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Toyota Verso?
Before Stage 1 the original of the Toyota Verso 2.2 D-4D 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Toyota Verso 2.2 D-4D 150 hp cost?
The remap price for the Toyota Verso 2.2 D-4D 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.