Toyota Toyota ProAce City 1.5 diesel 75 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Toyota Toyota ProAce City 1.5 diesel 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Toyota ProAce City 1.5 diesel 75 hp ECU
Toyota Toyota ProAce City (2020) 1.5 diesel 75 hp — mass-market diesel engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 75 to 105 hp (+30 hp, +40%) and torque from 230 to 280 Nm (+50 Nm). A 2020 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
Hybrid Synergy Drive is Toyota's own hybrid technology. D-4D is Toyota's badge for its turbo diesels. DPF/SCR with AdBlue is standard on Euro-6 Toyota diesels. On modern Toyota diesels, top models often require a Bench read.
The GR models (Yaris GR, Supra) have a growing tuning culture. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. Toyota's factory tuning runs close to the limit, leaving only modest headroom for Stage 1. Low-output Toyotas are naturally aspirated city cars, where Stage 1 is limited by the high compression ratio.
Frequently asked questions
How much horsepower does Stage 1 add for the Toyota Toyota ProAce City 1.5 diesel 75 hp?
Stage 1 for the Toyota Toyota ProAce City 1.5 diesel 75 hp adds +30 hp — power increases from 75 to 105 hp (+40%). Torque rises from 230 to 280 Nm (+50 Nm).
What does a Stage 1 remap of the Toyota Toyota ProAce City 1.5 diesel 75 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Toyota Toyota ProAce City with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
Is Stage 1 worth doing on the base Toyota Toyota ProAce City?
Yes, Stage 1 on the low-output Toyota Toyota ProAce City 1.5 diesel 75 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Toyota Toyota ProAce City 1.5 diesel 75 hp?
Stage 2 for the Toyota Toyota ProAce City 1.5 diesel 75 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Toyota Toyota ProAce City remain valid after Stage 1?
After remapping the Toyota Toyota ProAce City, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Toyota Toyota ProAce City?
Reading and writing via OBD takes 25-30 minutes on the Toyota Toyota ProAce City. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Toyota Toyota ProAce City?
Before Stage 1 the original of the Toyota Toyota ProAce City 1.5 diesel 75 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Toyota Toyota ProAce City 1.5 diesel 75 hp cost?
The remap price for the Toyota Toyota ProAce City 1.5 diesel 75 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.