Toyota Tacoma 2.7 VVT-i 163 hp — Stage 1 file (+7 hp)
hp
Stage 1 file for Toyota Tacoma 2.7 VVT-i 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Tacoma 2.7 VVT-i 163 hp ECU
Toyota Tacoma (2015) 2.7 VVT-i 163 hp — mass-market petrol engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 163 to 170 hp (+7 hp, +4%) and torque from 246 to 255 Nm (+9 Nm). In the CHIPOK database: 2 configurations. The 2015 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
GR (Gazoo Racing) is Toyota's performance division (GR Yaris, GR Corolla, GR Supra, GR86). The GR Supra uses the BMW B58 straight-six, an unusual turbo engine for Toyota. Mid-range Toyota petrol engines see a modest Stage 1 gain due to their naturally aspirated design. Toyota has historically focused on naturally aspirated, high-compression engines.
The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. The GR models (Yaris GR, Supra) have a growing tuning culture. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). Mid-range Toyota models use high-compression naturally aspirated engines, so Stage 1 yields a modest gain. The locked Denso platform requires a dedicated tuning toolset.
Frequently asked questions
How much does the power of the Toyota Tacoma 2.7 VVT-i 163 hp increase after Stage 1?
The Stage 1 gain for the Toyota Tacoma 2.7 VVT-i 163 hp is 7 hp (+4%) over the stock 163 hp, for a total of 170 hp. Torque rises from 246 to 255 Nm (+9 Nm).
What is Stage 1 chip tuning for the Toyota Tacoma?
Stage 1 on the Toyota Tacoma 2.7 VVT-i 163 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +7 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.7 VVT-i 163 hp?
Stage 1 on the Toyota Tacoma 2.7 VVT-i 163 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Toyota Tacoma 2.7 VVT-i 163 hp?
Stage 2 on the Toyota Tacoma 2.7 VVT-i 163 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Toyota Tacoma?
Stage 1 on the Toyota Tacoma voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Toyota Tacoma 2.7 VVT-i 163 hp done?
The full remap cycle for the Toyota Tacoma — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Toyota Tacoma?
The original Toyota Tacoma ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Toyota Tacoma 2.7 VVT-i 163 hp?
The cost of Stage 1 for the Toyota Tacoma 2.7 VVT-i 163 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.