Toyota Supra 2.0T 258 hp — Stage 1 file (+52 hp)
hp
Stage 1 file for Toyota Supra 2.0T 258 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Supra 2.0T 258 hp ECU
Toyota Supra (2019) 2.0T 258 hp — mass-market petrol engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 258 to 310 hp (+52 hp, +20%) and torque from 400 to 500 Nm (+100 Nm). A 2019 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
GR (Gazoo Racing) is Toyota's performance division (GR Yaris, GR Corolla, GR Supra, GR86). Denso is Toyota's in-house ECU supplier (a locked platform). Toyota's petrol range spans naturally aspirated Dynamic Force engines and turbo units for the GR series. The GR Supra uses the BMW B58 straight-six, an unusual turbo engine for Toyota.
The GR models (Yaris GR, Supra) have a growing tuning culture. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. High-output Toyota GR models sit in the performance segment with solid Stage 1 headroom.
Frequently asked questions
How many horsepower does the Toyota Supra 2.0T 258 hp reach after a remap?
Stage 1 chip tuning on the Toyota Supra 2.0T 258 hp boosts engine output by 52 hp: from 258 to 310 hp. Torque rises from 400 to 500 Nm (+100 Nm).
What changes in the Toyota Supra ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Toyota Supra with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +52 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Toyota Supra?
Stage 1 on the powerful Toyota Supra 2.0T 258 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Toyota Supra 2.0T 258 hp?
Stage 2 for the Toyota Supra 2.0T 258 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Toyota Supra remain valid after Stage 1?
After remapping the Toyota Supra, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Toyota Supra?
Reading and writing via OBD takes 25-30 minutes on the Toyota Supra. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Toyota Supra?
Before Stage 1 the original of the Toyota Supra 2.0T 258 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Toyota Supra 2.0T 258 hp cost?
The remap price for the Toyota Supra 2.0T 258 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.