Toyota Rav4 - Wildlander 3.5i V6 268 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Toyota Rav4 - Wildlander 3.5i V6 268 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Rav4 - Wildlander 3.5i V6 268 hp ECU
Toyota Rav4 - Wildlander (2005) 3.5i V6 268 hp — mass-market petrol engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 268 to 278 hp (+10 hp, +4%) and torque from 336 to 346 Nm (+10 Nm). A petrol engine built in 2005 — the era before widespread firmware encryption, OBD flash without complications.
Toyota Motor Corporation includes Lexus, Daihatsu and a stake in Subaru. Toyota's petrol range spans naturally aspirated Dynamic Force engines and turbo units for the GR series. The GR Supra uses the BMW B58 straight-six, an unusual turbo engine for Toyota. The Toyota GR-series delivers a solid gain from Stage 1 on the turbo engines.
The GR models (Yaris GR, Supra) have a growing tuning culture. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. High-output Toyota GR models sit in the performance segment with solid Stage 1 headroom.
Frequently asked questions
How much horsepower does Stage 1 add for the Toyota Rav4 - Wildlander 3.5i V6 268 hp?
Stage 1 chip tuning on the Toyota Rav4 - Wildlander 3.5i V6 268 hp boosts engine output by 10 hp: from 268 to 278 hp. Torque rises from 336 to 346 Nm (+10 Nm).
What changes in the Toyota Rav4 - Wildlander ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Toyota Rav4 - Wildlander with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +10 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Toyota Rav4 - Wildlander?
Stage 1 on the powerful Toyota Rav4 - Wildlander 3.5i V6 268 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Toyota Rav4 - Wildlander 3.5i V6 268 hp?
Stage 2 for the Toyota Rav4 - Wildlander 3.5i V6 268 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Toyota Rav4 - Wildlander remain valid after Stage 1?
After remapping the Toyota Rav4 - Wildlander, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Toyota Rav4 - Wildlander?
Reading and writing via OBD takes 25-30 minutes on the Toyota Rav4 - Wildlander. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Toyota Rav4 - Wildlander?
Before Stage 1 the original of the Toyota Rav4 - Wildlander 3.5i V6 268 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Toyota Rav4 - Wildlander 3.5i V6 268 hp cost?
The remap price for the Toyota Rav4 - Wildlander 3.5i V6 268 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.