Toyota ProAce 2.0 D-4D 163 hp — Stage 1 file (+27 hp)
hp
Stage 1 file for Toyota ProAce 2.0 D-4D 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota ProAce 2.0 D-4D 163 hp ECU
Toyota ProAce (2014) 2.0 D-4D 163 hp — mass-market diesel engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 163 to 190 hp (+27 hp, +17%) and torque from 340 to 400 Nm (+60 Nm). The 2014 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Hybrid Synergy Drive is Toyota's own hybrid technology. Toyota's diesel range is aimed mainly at pickups and SUVs (Hilux, Land Cruiser). The Toyota Hilux is the world's best-selling pickup and a high-volume tuning subject. D-4D is Toyota's badge for its turbo diesels.
The GR models (Yaris GR, Supra) have a growing tuning culture. The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). Mid-range Toyota models use high-compression naturally aspirated engines, so Stage 1 yields a modest gain. The locked Denso platform requires a dedicated tuning toolset.
Frequently asked questions
What power gain do you get after chip tuning the Toyota ProAce 2.0 D-4D 163 hp?
The Stage 1 gain for the Toyota ProAce 2.0 D-4D 163 hp is 27 hp (+17%) over the stock 163 hp, for a total of 190 hp. Torque rises from 340 to 400 Nm (+60 Nm).
What is Stage 1 chip tuning for the Toyota ProAce?
Stage 1 on the Toyota ProAce 2.0 D-4D 163 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +27 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 D-4D 163 hp?
Stage 1 on the Toyota ProAce 2.0 D-4D 163 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Toyota ProAce 2.0 D-4D 163 hp?
Stage 2 on the Toyota ProAce 2.0 D-4D 163 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Toyota ProAce?
Stage 1 on the Toyota ProAce voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Toyota ProAce 2.0 D-4D 163 hp done?
The full remap cycle for the Toyota ProAce — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Toyota ProAce?
The original Toyota ProAce ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Toyota ProAce 2.0 D-4D 163 hp?
The cost of Stage 1 for the Toyota ProAce 2.0 D-4D 163 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.