Toyota Landcruiser 2.8 D-4D (2015) 177 hp — Stage 1 file (+33 hp)
hp
Stage 1 file for Toyota Landcruiser 2.8 D-4D (2015) 177 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Landcruiser 2.8 D-4D (2015) 177 hp ECU
Toyota Landcruiser (2015) 2.8 D-4D (2015) 177 hp — mass-market diesel engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 177 to 210 hp (+33 hp, +19%) and torque from 440 to 500 Nm (+60 Nm). In the CHIPOK database: 2 configurations. A diesel built in 2015 — the Tricore ECU era; OBD flash works on most production revisions.
Lexus is Toyota's premium sub-brand. Toyota's diesel range is aimed mainly at pickups and SUVs (Hilux, Land Cruiser). The Toyota Hilux is the world's best-selling pickup and a high-volume tuning subject. D-4D is Toyota's badge for its turbo diesels.
Stage 1 on Toyota diesels delivers a noticeable torque gain, ideal for pickups. The GR models (Yaris GR, Supra) have a growing tuning culture. The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. The locked Denso platform requires a dedicated tuning toolset. Mid-range Toyota models use high-compression naturally aspirated engines, so Stage 1 yields a modest gain.
Frequently asked questions
What power gain do you get after chip tuning the Toyota Landcruiser 2.8 D-4D (2015) 177 hp?
Stage 1 for the Toyota Landcruiser 2.8 D-4D (2015) 177 hp adds +33 hp — power increases from 177 to 210 hp (+19%). Torque rises from 440 to 500 Nm (+60 Nm).
What does a Stage 1 remap of the Toyota Landcruiser 2.8 D-4D (2015) 177 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Toyota Landcruiser with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +33 hp with no hardware changes.
What is the risk of Stage 1 on the Toyota Landcruiser 2.8 D-4D (2015) 177 hp?
A remap of the Toyota Landcruiser 2.8 D-4D (2015) 177 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Toyota Landcruiser 2.8 D-4D (2015) 177 hp?
Stage 2 for the Toyota Landcruiser 2.8 D-4D (2015) 177 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Toyota Landcruiser remain valid after Stage 1?
After remapping the Toyota Landcruiser, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Toyota Landcruiser?
Reading and writing via OBD takes 25-30 minutes on the Toyota Landcruiser. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Toyota Landcruiser?
Before Stage 1 the original of the Toyota Landcruiser 2.8 D-4D (2015) 177 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Toyota Landcruiser 2.8 D-4D (2015) 177 hp cost?
The remap price for the Toyota Landcruiser 2.8 D-4D (2015) 177 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.