Toyota IQ 1.3 VVTI 100 hp — Stage 1 file (+8 hp)
hp
Stage 1 file for Toyota IQ 1.3 VVTI 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota IQ 1.3 VVTI 100 hp ECU
Toyota IQ (2009) 1.3 VVTI 100 hp — mass-market petrol engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 100 to 108 hp (+8 hp, +8%) and torque from 125 to 135 Nm (+10 Nm). The 2009 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Toyota was a pioneer of mass-market hybrids (the Prius since 1997). Toyota's petrol range spans naturally aspirated Dynamic Force engines and turbo units for the GR series. The GR Supra uses the BMW B58 straight-six, an unusual turbo engine for Toyota. Mid-range Toyota petrol engines see a modest Stage 1 gain due to their naturally aspirated design.
The GR models (Yaris GR, Supra) have a growing tuning culture. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. Mid-range Toyota models use high-compression naturally aspirated engines, so Stage 1 yields a modest gain. The locked Denso platform requires a dedicated tuning toolset.
Frequently asked questions
How much horsepower does Stage 1 add for the Toyota IQ 1.3 VVTI 100 hp?
The Stage 1 gain for the Toyota IQ 1.3 VVTI 100 hp is 8 hp (+8%) over the stock 100 hp, for a total of 108 hp. Torque rises from 125 to 135 Nm (+10 Nm).
What is Stage 1 chip tuning for the Toyota IQ?
Stage 1 is a software optimization of the factory ECU firmware of the Toyota IQ with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +8 hp with no hardware changes.
What is the risk of Stage 1 on the Toyota IQ 1.3 VVTI 100 hp?
A remap of the Toyota IQ 1.3 VVTI 100 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Toyota IQ 1.3 VVTI 100 hp?
Stage 2 on the Toyota IQ 1.3 VVTI 100 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Toyota IQ remain valid after Stage 1?
After remapping the Toyota IQ, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Toyota IQ?
Reading and writing via OBD takes 25-30 minutes on the Toyota IQ. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Toyota IQ?
Before Stage 1 the original of the Toyota IQ 1.3 VVTI 100 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Toyota IQ 1.3 VVTI 100 hp cost?
The remap price for the Toyota IQ 1.3 VVTI 100 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.