Toyota Innova 2.4 D4-D 150 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Toyota Innova 2.4 D4-D 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Innova 2.4 D4-D 150 hp ECU
Toyota Innova (2020) 2.4 D4-D 150 hp — mass-market diesel engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 150 to 180 hp (+30 hp, +20%) and torque from 400 to 450 Nm (+50 Nm). A modern diesel built in 2020 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Hybrid Synergy Drive is Toyota's own hybrid technology. Mid-range Toyota diesels are a high-volume chip tuning subject for pickups. On modern Toyota diesels, top models often require a Bench read. D-4D is Toyota's badge for its turbo diesels.
The GR models (Yaris GR, Supra) have a growing tuning culture. The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). Mid-range Toyota models use high-compression naturally aspirated engines, so Stage 1 yields a modest gain. The locked Denso platform requires a dedicated tuning toolset.
Frequently asked questions
What is the Stage 1 effect on the Toyota Innova 2.4 D4-D 150 hp?
The Stage 1 gain for the Toyota Innova 2.4 D4-D 150 hp is 30 hp (+20%) over the stock 150 hp, for a total of 180 hp. Torque rises from 400 to 450 Nm (+50 Nm).
What is Stage 1 chip tuning for the Toyota Innova?
Stage 1 is a software optimization of the factory ECU firmware of the Toyota Innova with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Toyota Innova 2.4 D4-D 150 hp?
A remap of the Toyota Innova 2.4 D4-D 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Toyota Innova 2.4 D4-D 150 hp?
Stage 2 on the Toyota Innova 2.4 D4-D 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Toyota Innova remain valid after Stage 1?
After remapping the Toyota Innova, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Toyota Innova?
Reading and writing via OBD takes 25-30 minutes on the Toyota Innova. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Toyota Innova?
Before Stage 1 the original of the Toyota Innova 2.4 D4-D 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Toyota Innova 2.4 D4-D 150 hp cost?
The remap price for the Toyota Innova 2.4 D4-D 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.