Toyota Innova 4.0 V6 249 hp — Stage 1 file (+16 hp)
hp
Stage 1 file for Toyota Innova 4.0 V6 249 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Innova 4.0 V6 249 hp ECU
Toyota Innova (2004) 4.0 V6 249 hp — mass-market petrol engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 249 to 265 hp (+16 hp, +6%) and torque from 382 to 405 Nm (+23 Nm). A petrol engine built in 2004 — the era before widespread firmware encryption, OBD flash without complications.
GR (Gazoo Racing) is Toyota's performance division (GR Yaris, GR Corolla, GR Supra, GR86). The Toyota GR-series delivers a solid gain from Stage 1 on the turbo engines. Toyota has historically focused on naturally aspirated, high-compression engines. Denso is Toyota's in-house ECU supplier (a locked platform).
The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. The GR models (Yaris GR, Supra) have a growing tuning culture. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). High-output Toyota GR models sit in the performance segment with solid Stage 1 headroom.
Frequently asked questions
What is the Stage 1 effect on the Toyota Innova 4.0 V6 249 hp?
Stage 1 chip tuning on the Toyota Innova 4.0 V6 249 hp boosts engine output by 16 hp: from 249 to 265 hp. Torque rises from 382 to 405 Nm (+23 Nm).
What changes in the Toyota Innova ECU after Stage 1?
Stage 1 on the Toyota Innova 4.0 V6 249 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +16 hp with no hardware changes.
What does Stage 1 give on the powerful Toyota Innova 4.0 V6 249 hp?
Stage 1 on the powerful Toyota Innova 4.0 V6 249 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Toyota Innova 4.0 V6 249 hp?
Stage 2 for the Toyota Innova 4.0 V6 249 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Toyota Innova?
Stage 1 on the Toyota Innova voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Toyota Innova 4.0 V6 249 hp done?
The full remap cycle for the Toyota Innova — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Toyota Innova?
The original Toyota Innova ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Toyota Innova 4.0 V6 249 hp?
The cost of Stage 1 for the Toyota Innova 4.0 V6 249 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.