Toyota Highlander 2.0T 220 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Toyota Highlander 2.0T 220 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Highlander 2.0T 220 hp ECU
Toyota Highlander (2013) 2.0T 220 hp — mass-market petrol engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 220 to 250 hp (+30 hp, +14%) and torque from 350 to 410 Nm (+60 Nm). The 2013 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
GR (Gazoo Racing) is Toyota's performance division (GR Yaris, GR Corolla, GR Supra, GR86). Denso is Toyota's in-house ECU supplier (a locked platform). Toyota's petrol range spans naturally aspirated Dynamic Force engines and turbo units for the GR series. The GR Supra uses the BMW B58 straight-six, an unusual turbo engine for Toyota.
The GR models (Yaris GR, Supra) have a growing tuning culture. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. High-output Toyota GR models sit in the performance segment with solid Stage 1 headroom.
Frequently asked questions
How many horsepower does the Toyota Highlander 2.0T 220 hp reach after a remap?
The Stage 1 gain for the Toyota Highlander 2.0T 220 hp is 30 hp (+14%) over the stock 220 hp, for a total of 250 hp. Torque rises from 350 to 410 Nm (+60 Nm).
What is Stage 1 chip tuning for the Toyota Highlander?
Stage 1 is a software optimization of the factory ECU firmware of the Toyota Highlander with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Toyota Highlander?
The high-output Toyota Highlander 2.0T 220 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Toyota Highlander 2.0T 220 hp?
Stage 2 on the Toyota Highlander 2.0T 220 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Toyota Highlander remain valid after Stage 1?
After remapping the Toyota Highlander, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Toyota Highlander?
Reading and writing via OBD takes 25-30 minutes on the Toyota Highlander. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Toyota Highlander?
Before Stage 1 the original of the Toyota Highlander 2.0T 220 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Toyota Highlander 2.0T 220 hp cost?
The remap price for the Toyota Highlander 2.0T 220 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.