Toyota Corolla 2.0i Hybrid 152 hp — Stage 1 file (+8 hp)
hp
Stage 1 file for Toyota Corolla 2.0i Hybrid 152 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Corolla 2.0i Hybrid 152 hp ECU
Toyota Corolla (2018) 2.0i Hybrid 152 hp — mass-market hybrid engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 152 to 160 hp (+8 hp, +5%) and torque from 190 to 200 Nm (+10 Nm).
Hybrid Synergy Drive is Toyota's own hybrid technology. Hybrid Synergy Drive underpins Toyota's hybrid range (Prius, RAV4, Camry). Toyota is the world leader in hybrid production volume. Toyota PHEV variants include the Prius Prime, RAV4 Prime and Highlander Hybrid Plug-in.
The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. The GR models (Yaris GR, Supra) have a growing tuning culture. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). Mid-range Toyota models use high-compression naturally aspirated engines, so Stage 1 yields a modest gain. The locked Denso platform requires a dedicated tuning toolset.
Frequently asked questions
How many horsepower does the Toyota Corolla 2.0i Hybrid 152 hp reach after a remap?
After Stage 1 the power of the Toyota Corolla 2.0i Hybrid 152 hp rises from 152 to 160 hp, a gain of 8 hp (+5%). Torque rises from 190 to 200 Nm (+10 Nm).
How does Stage 1 differ from stock on the Toyota Corolla?
Stage 1 on the Toyota Corolla 2.0i Hybrid 152 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +8 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0i Hybrid 152 hp?
Stage 1 on the Toyota Corolla 2.0i Hybrid 152 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Toyota Corolla 2.0i Hybrid 152 hp?
Stage 2 on the Toyota Corolla 2.0i Hybrid 152 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Toyota Corolla?
Stage 1 on the Toyota Corolla voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Toyota Corolla 2.0i Hybrid 152 hp done?
The full remap cycle for the Toyota Corolla — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Toyota Corolla?
The original Toyota Corolla ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Toyota Corolla 2.0i Hybrid 152 hp?
The cost of Stage 1 for the Toyota Corolla 2.0i Hybrid 152 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.