Toyota Corolla 1.6T (GR) 300 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Toyota Corolla 1.6T (GR) 300 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Corolla 1.6T (GR) 300 hp ECU
Toyota Corolla (2018) 1.6T (GR) 300 hp — mass-market petrol engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 300 to 320 hp (+20 hp, +7%) and torque from 370 to 420 Nm (+50 Nm). A modern petrol engine built in 2018 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Hybrid Synergy Drive is Toyota's own hybrid technology. Toyota's petrol range spans naturally aspirated Dynamic Force engines and turbo units for the GR series. The GR Supra uses the BMW B58 straight-six, an unusual turbo engine for Toyota. The Toyota GR-series delivers a solid gain from Stage 1 on the turbo engines.
The GR models (Yaris GR, Supra) have a growing tuning culture. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. High-output Toyota GR models sit in the performance segment with solid Stage 1 headroom.
Frequently asked questions
How much horsepower does Stage 1 add for the Toyota Corolla 1.6T (GR) 300 hp?
The Stage 1 gain for the Toyota Corolla 1.6T (GR) 300 hp is 20 hp (+7%) over the stock 300 hp, for a total of 320 hp. Torque rises from 370 to 420 Nm (+50 Nm).
What is Stage 1 chip tuning for the Toyota Corolla?
Stage 1 is a software optimization of the factory ECU firmware of the Toyota Corolla with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Toyota Corolla?
The high-output Toyota Corolla 1.6T (GR) 300 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Toyota Corolla 1.6T (GR) 300 hp?
Stage 2 on the Toyota Corolla 1.6T (GR) 300 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Toyota Corolla remain valid after Stage 1?
After remapping the Toyota Corolla, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Toyota Corolla?
Reading and writing via OBD takes 25-30 minutes on the Toyota Corolla. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Toyota Corolla?
Before Stage 1 the original of the Toyota Corolla 1.6T (GR) 300 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Toyota Corolla 1.6T (GR) 300 hp cost?
The remap price for the Toyota Corolla 1.6T (GR) 300 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.