Toyota Corolla 1.6i 131 hp — Stage 1 file (+4 hp)
hp
Stage 1 file for Toyota Corolla 1.6i 131 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Corolla 1.6i 131 hp ECU
Toyota Corolla (2012) 1.6i 131 hp — mass-market petrol engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 131 to 135 hp (+4 hp, +3%) and torque from 160 to 165 Nm (+5 Nm). A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
Toyota is Japan's largest carmaker, founded in 1937 in Toyota City. The GR Supra uses the BMW B58 straight-six, an unusual turbo engine for Toyota. Mid-range Toyota petrol engines see a modest Stage 1 gain due to their naturally aspirated design. Toyota has historically focused on naturally aspirated, high-compression engines.
The GR models (Yaris GR, Supra) have a growing tuning culture. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. The locked Denso platform requires a dedicated tuning toolset. Mid-range Toyota models use high-compression naturally aspirated engines, so Stage 1 yields a modest gain.
Frequently asked questions
How much does the power of the Toyota Corolla 1.6i 131 hp increase after Stage 1?
Stage 1 for the Toyota Corolla 1.6i 131 hp adds +4 hp — power increases from 131 to 135 hp (+3%). Torque rises from 160 to 165 Nm (+5 Nm).
What does a Stage 1 remap of the Toyota Corolla 1.6i 131 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Toyota Corolla with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +4 hp with no hardware changes.
What is the risk of Stage 1 on the Toyota Corolla 1.6i 131 hp?
A remap of the Toyota Corolla 1.6i 131 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Toyota Corolla 1.6i 131 hp?
Stage 2 for the Toyota Corolla 1.6i 131 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Toyota Corolla remain valid after Stage 1?
After remapping the Toyota Corolla, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Toyota Corolla?
Reading and writing via OBD takes 25-30 minutes on the Toyota Corolla. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Toyota Corolla?
Before Stage 1 the original of the Toyota Corolla 1.6i 131 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Toyota Corolla 1.6i 131 hp cost?
The remap price for the Toyota Corolla 1.6i 131 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.