Toyota Corolla 1.6i 122 hp — Stage 1 file (+8 hp)
hp
Stage 1 file for Toyota Corolla 1.6i 122 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Corolla 1.6i 122 hp ECU
Toyota Corolla (2006) 1.6i 122 hp — mass-market petrol engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 122 to 130 hp (+8 hp, +7%) and torque from 153 to 163 Nm (+10 Nm). The 2006 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Lexus is Toyota's premium sub-brand. The GR Supra uses the BMW B58 straight-six, an unusual turbo engine for Toyota. Mid-range Toyota petrol engines see a modest Stage 1 gain due to their naturally aspirated design. Toyota has historically focused on naturally aspirated, high-compression engines.
The GR models (Yaris GR, Supra) have a growing tuning culture. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. Mid-range Toyota models use high-compression naturally aspirated engines, so Stage 1 yields a modest gain. The locked Denso platform requires a dedicated tuning toolset.
Frequently asked questions
How much does the power of the Toyota Corolla 1.6i 122 hp increase after Stage 1?
After Stage 1 the power of the Toyota Corolla 1.6i 122 hp rises from 122 to 130 hp, a gain of 8 hp (+7%). Torque rises from 153 to 163 Nm (+10 Nm).
How does Stage 1 differ from stock on the Toyota Corolla?
Stage 1 is a software optimization of the factory ECU firmware of the Toyota Corolla with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +8 hp with no hardware changes.
What is the risk of Stage 1 on the Toyota Corolla 1.6i 122 hp?
A remap of the Toyota Corolla 1.6i 122 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Toyota Corolla 1.6i 122 hp?
Stage 2 on the Toyota Corolla 1.6i 122 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Toyota Corolla remain valid after Stage 1?
After remapping the Toyota Corolla, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Toyota Corolla?
Reading and writing via OBD takes 25-30 minutes on the Toyota Corolla. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Toyota Corolla?
Before Stage 1 the original of the Toyota Corolla 1.6i 122 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Toyota Corolla 1.6i 122 hp cost?
The remap price for the Toyota Corolla 1.6i 122 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.