Toyota Avalon 3.5i V6 268 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Toyota Avalon 3.5i V6 268 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Avalon 3.5i V6 268 hp ECU
Toyota Avalon (2012) 3.5i V6 268 hp — mass-market petrol engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 268 to 278 hp (+10 hp, +4%) and torque from 336 to 346 Nm (+10 Nm). In the CHIPOK database: 2 configurations. The 2012 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Toyota Motor Corporation includes Lexus, Daihatsu and a stake in Subaru. The GR Supra uses the BMW B58 straight-six, an unusual turbo engine for Toyota. The Toyota GR-series delivers a solid gain from Stage 1 on the turbo engines. Toyota has historically focused on naturally aspirated, high-compression engines.
The GR models (Yaris GR, Supra) have a growing tuning culture. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. High-output Toyota GR models sit in the performance segment with solid Stage 1 headroom.
Frequently asked questions
How much does the power of the Toyota Avalon 3.5i V6 268 hp increase after Stage 1?
The Stage 1 gain for the Toyota Avalon 3.5i V6 268 hp is 10 hp (+4%) over the stock 268 hp, for a total of 278 hp. Torque rises from 336 to 346 Nm (+10 Nm).
What is Stage 1 chip tuning for the Toyota Avalon?
Stage 1 is a software optimization of the factory ECU firmware of the Toyota Avalon with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +10 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Toyota Avalon?
The high-output Toyota Avalon 3.5i V6 268 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Toyota Avalon 3.5i V6 268 hp?
Stage 2 on the Toyota Avalon 3.5i V6 268 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Toyota Avalon remain valid after Stage 1?
After remapping the Toyota Avalon, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Toyota Avalon?
Reading and writing via OBD takes 25-30 minutes on the Toyota Avalon. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Toyota Avalon?
Before Stage 1 the original of the Toyota Avalon 3.5i V6 268 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Toyota Avalon 3.5i V6 268 hp cost?
The remap price for the Toyota Avalon 3.5i V6 268 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.