Toyota Auris - Blade 1.2T 8NR FTS 116 hp — Stage 1 file (+14 hp)
hp
Stage 1 file for Toyota Auris - Blade 1.2T 8NR FTS 116 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Auris - Blade 1.2T 8NR FTS 116 hp ECU
Toyota Auris - Blade (2018) 1.2T 8NR FTS 116 hp — mass-market petrol engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 116 to 130 hp (+14 hp, +12%) and torque from 185 to 225 Nm (+40 Nm). ECU — Denso GASOLINE GEN 2 [1.28MB/1.5MB/2.0MB]. Flashing method: OBD or Bench depending on the unit's protection. A 2018 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Toyota was a pioneer of mass-market hybrids (the Prius since 1997). Denso is Toyota's in-house ECU supplier (a locked platform). Mid-range Toyota petrol engines see a modest Stage 1 gain due to their naturally aspirated design. The Denso ECU is a locked Toyota platform, with read/write via specific tools.
The Toyota Denso ECU requires dedicated read/write tooling. The GR models (Yaris GR, Supra) have a growing tuning culture. The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. The locked Denso platform requires a dedicated tuning toolset. Mid-range Toyota models use high-compression naturally aspirated engines, so Stage 1 yields a modest gain.
Frequently asked questions
How much horsepower does Stage 1 add for the Toyota Auris - Blade 1.2T 8NR FTS 116 hp?
Stage 1 for the Toyota Auris - Blade 1.2T 8NR FTS 116 hp adds +14 hp — power increases from 116 to 130 hp (+12%). Torque rises from 185 to 225 Nm (+40 Nm).
What does a Stage 1 remap of the Toyota Auris - Blade 1.2T 8NR FTS 116 hp include?
Stage 1 on the Toyota Auris - Blade 1.2T 8NR FTS 116 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +14 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.2T 8NR FTS 116 hp?
Stage 1 on the Toyota Auris - Blade 1.2T 8NR FTS 116 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Toyota Auris - Blade 1.2T 8NR FTS 116 hp?
Stage 2 for the Toyota Auris - Blade 1.2T 8NR FTS 116 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Toyota Auris - Blade 1.2T 8NR FTS 116 hp run?
The control unit of the Toyota Auris - Blade 1.2T 8NR FTS 116 hp is the Denso GASOLINE GEN 2 [1.28MB/1.5MB/2.0MB]. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Toyota Auris - Blade?
Stage 1 on the Toyota Auris - Blade voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Toyota Auris - Blade 1.2T 8NR FTS 116 hp done?
The full remap cycle for the Toyota Auris - Blade — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Toyota Auris - Blade?
The original Toyota Auris - Blade ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Toyota Auris - Blade 1.2T 8NR FTS 116 hp?
The cost of Stage 1 for the Toyota Auris - Blade 1.2T 8NR FTS 116 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.