Toyota Auris - Blade 2.4 160 hp — Stage 1 file
hp
Stage 1 file for Toyota Auris - Blade 2.4 160 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Auris - Blade 2.4 160 hp ECU
Toyota Auris - Blade (2006) 2.4 160 hp — mass-market petrol engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). A petrol engine built in 2006 — the era before widespread firmware encryption, OBD flash without complications.
Toyota shares some engines with Subaru (BRZ/86) and BMW (Supra). Denso is Toyota's in-house ECU supplier (a locked platform). Toyota's petrol range spans naturally aspirated Dynamic Force engines and turbo units for the GR series. The GR Supra uses the BMW B58 straight-six, an unusual turbo engine for Toyota.
The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. The GR models (Yaris GR, Supra) have a growing tuning culture. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). The locked Denso platform requires a dedicated tuning toolset. Mid-range Toyota models use high-compression naturally aspirated engines, so Stage 1 yields a modest gain.
Frequently asked questions
What changes in the Toyota Auris - Blade ECU after Stage 1?
Stage 1 on the Toyota Auris - Blade 2.4 160 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved.
Is a Stage 1 remap safe for the 2.4 160 hp?
Stage 1 on the Toyota Auris - Blade 2.4 160 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Toyota Auris - Blade 2.4 160 hp?
Stage 2 for the Toyota Auris - Blade 2.4 160 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Toyota Auris - Blade?
Stage 1 on the Toyota Auris - Blade voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Toyota Auris - Blade 2.4 160 hp done?
The full remap cycle for the Toyota Auris - Blade — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Toyota Auris - Blade?
The original Toyota Auris - Blade ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Toyota Auris - Blade 2.4 160 hp?
The cost of Stage 1 for the Toyota Auris - Blade 2.4 160 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.