Toyota Auris - Blade 2.0 D-4D 126 hp — Stage 1 file (+24 hp)
hp
Stage 1 file for Toyota Auris - Blade 2.0 D-4D 126 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Auris - Blade 2.0 D-4D 126 hp ECU
Toyota Auris - Blade (2006) 2.0 D-4D 126 hp — mass-market diesel engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 126 to 150 hp (+24 hp, +19%) and torque from 300 to 380 Nm (+80 Nm). Diesel engines built in 2006 — the era of classic Common Rail without strong encryption.
Hybrid Synergy Drive is Toyota's own hybrid technology. D-4D is Toyota's badge for its turbo diesels. DPF/SCR with AdBlue is standard on Euro-6 Toyota diesels. Mid-range Toyota diesels are a high-volume chip tuning subject for pickups.
Stage 1 on Toyota diesels delivers a noticeable torque gain, ideal for pickups. The GR models (Yaris GR, Supra) have a growing tuning culture. The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. The locked Denso platform requires a dedicated tuning toolset. Mid-range Toyota models use high-compression naturally aspirated engines, so Stage 1 yields a modest gain.
Frequently asked questions
How much horsepower does Stage 1 add for the Toyota Auris - Blade 2.0 D-4D 126 hp?
Stage 1 for the Toyota Auris - Blade 2.0 D-4D 126 hp adds +24 hp — power increases from 126 to 150 hp (+19%). Torque rises from 300 to 380 Nm (+80 Nm).
What does a Stage 1 remap of the Toyota Auris - Blade 2.0 D-4D 126 hp include?
Stage 1 on the Toyota Auris - Blade 2.0 D-4D 126 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +24 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 D-4D 126 hp?
Stage 1 on the Toyota Auris - Blade 2.0 D-4D 126 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Toyota Auris - Blade 2.0 D-4D 126 hp?
Stage 2 for the Toyota Auris - Blade 2.0 D-4D 126 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Toyota Auris - Blade?
Stage 1 on the Toyota Auris - Blade voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Toyota Auris - Blade 2.0 D-4D 126 hp done?
The full remap cycle for the Toyota Auris - Blade — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Toyota Auris - Blade?
The original Toyota Auris - Blade ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Toyota Auris - Blade 2.0 D-4D 126 hp?
The cost of Stage 1 for the Toyota Auris - Blade 2.0 D-4D 126 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.