Toyota Auris - Blade 1.4 D-4D 90 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Toyota Auris - Blade 1.4 D-4D 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Auris - Blade 1.4 D-4D 90 hp ECU
Toyota Auris - Blade (2006) 1.4 D-4D 90 hp — mass-market diesel engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 90 to 115 hp (+25 hp, +28%) and torque from 190 to 250 Nm (+60 Nm). The 2006 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Toyota shares some engines with Subaru (BRZ/86) and BMW (Supra). DPF/SCR with AdBlue is standard on Euro-6 Toyota diesels. Toyota's diesel range is aimed mainly at pickups and SUVs (Hilux, Land Cruiser). D-4D is Toyota's badge for its turbo diesels.
Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. The GR models (Yaris GR, Supra) have a growing tuning culture. Low-output Toyotas are naturally aspirated city cars, where Stage 1 is limited by the high compression ratio. Toyota's factory tuning runs close to the limit, leaving only modest headroom for Stage 1.
Frequently asked questions
How many horsepower does the Toyota Auris - Blade 1.4 D-4D 90 hp reach after a remap?
The Stage 1 gain for the Toyota Auris - Blade 1.4 D-4D 90 hp is 25 hp (+28%) over the stock 90 hp, for a total of 115 hp. Torque rises from 190 to 250 Nm (+60 Nm).
What is Stage 1 chip tuning for the Toyota Auris - Blade?
Stage 1 chip tuning of the Toyota Auris - Blade is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +25 hp with no hardware changes.
What does chip tuning give on the low-output Toyota Auris - Blade 1.4 D-4D 90 hp?
Stage 1 on the base Toyota Auris - Blade is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How much does Stage 2 add on the Toyota Auris - Blade?
Stage 2 on the Toyota Auris - Blade 1.4 D-4D 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Toyota Auris - Blade warranty after chip tuning?
The factory warranty of the Toyota Auris - Blade does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Toyota Auris - Blade take?
On the Toyota Auris - Blade 1.4 D-4D 90 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Toyota Auris - Blade?
Yes, the original ECU firmware of the Toyota Auris - Blade 1.4 D-4D 90 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Toyota Auris - Blade?
Stage 1 for the Toyota Auris - Blade 1.4 D-4D 90 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.