Toyota Alphard - Vellfire 3.5i V6 300 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Toyota Alphard - Vellfire 3.5i V6 300 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Toyota Alphard - Vellfire 3.5i V6 300 hp ECU
Toyota Alphard - Vellfire (2015) 3.5i V6 300 hp — mass-market petrol engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 300 to 310 hp (+10 hp, +3%) and torque from 362 to 372 Nm (+10 Nm). A petrol engine built in 2015 — a Tricore platform without strong protection; OBD access works.
GR (Gazoo Racing) is Toyota's performance division (GR Yaris, GR Corolla, GR Supra, GR86). Toyota's petrol range spans naturally aspirated Dynamic Force engines and turbo units for the GR series. The GR Supra uses the BMW B58 straight-six, an unusual turbo engine for Toyota. The Toyota GR-series delivers a solid gain from Stage 1 on the turbo engines.
The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. The GR models (Yaris GR, Supra) have a growing tuning culture. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). High-output Toyota GR models sit in the performance segment with solid Stage 1 headroom.
Frequently asked questions
How much horsepower does Stage 1 add for the Toyota Alphard - Vellfire 3.5i V6 300 hp?
Stage 1 for the Toyota Alphard - Vellfire 3.5i V6 300 hp adds +10 hp — power increases from 300 to 310 hp (+3%). Torque rises from 362 to 372 Nm (+10 Nm).
What does a Stage 1 remap of the Toyota Alphard - Vellfire 3.5i V6 300 hp include?
Stage 1 on the Toyota Alphard - Vellfire 3.5i V6 300 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +10 hp with no hardware changes.
What does Stage 1 give on the powerful Toyota Alphard - Vellfire 3.5i V6 300 hp?
Stage 1 on the powerful Toyota Alphard - Vellfire 3.5i V6 300 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Toyota Alphard - Vellfire 3.5i V6 300 hp?
Stage 2 for the Toyota Alphard - Vellfire 3.5i V6 300 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Toyota Alphard - Vellfire?
Stage 1 on the Toyota Alphard - Vellfire voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Toyota Alphard - Vellfire 3.5i V6 300 hp done?
The full remap cycle for the Toyota Alphard - Vellfire — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Toyota Alphard - Vellfire?
The original Toyota Alphard - Vellfire ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Toyota Alphard - Vellfire 3.5i V6 300 hp?
The cost of Stage 1 for the Toyota Alphard - Vellfire 3.5i V6 300 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.