SWM G01F 1.5T 156 hp — Stage 1 file
hp
Stage 1 file for SWM G01F 1.5T 156 hp
Target +0 hp. Custom development for your engine.
Chip tuning for SWM G01F 1.5T 156 hp ECU
SWM G01F (2020) 1.5T 156 hp — sports petrol engine of the passenger segment of the Volkswagen Group (через Audi) group (Италия, 1971). A 2020 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
SWM specialises in enduro and track motorcycles. SWM is an Italian motorcycle manufacturer, founded in 1971 and revived in 2014. Ducati uses its proprietary L-twin (90-degree V-twin) and V4 engines.
Motorcycle factory calibration often includes limiters to pass certification. The motorcycle chip tuning segment is a narrow niche centred on track tuning. Mid-range Ducati models are the Monster and Scrambler.
Frequently asked questions
What changes in the SWM G01F ECU after Stage 1?
Stage 1 on the SWM G01F 1.5T 156 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved.
Is a Stage 1 remap safe for the 1.5T 156 hp?
Stage 1 on the SWM G01F 1.5T 156 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the SWM G01F 1.5T 156 hp?
Stage 2 for the SWM G01F 1.5T 156 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the SWM G01F?
Stage 1 on the SWM G01F voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the SWM G01F 1.5T 156 hp done?
The full remap cycle for the SWM G01F — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the SWM G01F?
The original SWM G01F ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the SWM G01F 1.5T 156 hp?
The cost of Stage 1 for the SWM G01F 1.5T 156 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.