Subaru Outback 2.0 D 150 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Subaru Outback 2.0 D 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Subaru Outback 2.0 D 150 hp ECU
Subaru Outback (2009) 2.0 D 150 hp — mass-market diesel engine of the passenger segment of the Subaru Corporation (Toyota владеет 20%) group (Япония, 1953). Stage 1 chip tuning raises power from 150 to 175 hp (+25 hp, +17%) and torque from 350 to 400 Nm (+50 Nm). Diesel engines built in 2009 — the era of classic Common Rail without strong encryption.
STI (Subaru Tecnica International) is the performance division that builds the WRX STI. Subaru uses permanent all-wheel drive (AWD) on most of its models. The WRX STI is Subaru's iconic rally model. Subaru diesels are rare and were aimed mainly at the European market. Subaru Boxer diesels are a niche chip tuning segment. Subaru has unique flat diesel engines (Boxer Diesel).
The Subaru community in JDM and rally culture is the largest for the WRX/STI. Mid-range Subaru models use naturally aspirated Boxer engines with a conservative calibration.
Frequently asked questions
What is the Stage 1 effect on the Subaru Outback 2.0 D 150 hp?
Stage 1 chip tuning on the Subaru Outback 2.0 D 150 hp boosts engine output by 25 hp: from 150 to 175 hp. Torque rises from 350 to 400 Nm (+50 Nm).
What changes in the Subaru Outback ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Subaru Outback with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
What is the risk of Stage 1 on the Subaru Outback 2.0 D 150 hp?
A remap of the Subaru Outback 2.0 D 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Subaru Outback 2.0 D 150 hp?
Stage 2 for the Subaru Outback 2.0 D 150 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Subaru Outback remain valid after Stage 1?
After remapping the Subaru Outback, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Subaru Outback?
Reading and writing via OBD takes 25-30 minutes on the Subaru Outback. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Subaru Outback?
Before Stage 1 the original of the Subaru Outback 2.0 D 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Subaru Outback 2.0 D 150 hp cost?
The remap price for the Subaru Outback 2.0 D 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.