Subaru Levorg 1.6 turbo 170 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Subaru Levorg 1.6 turbo 170 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Subaru Levorg 1.6 turbo 170 hp ECU
Subaru Levorg (2015) 1.6 turbo 170 hp — mass-market petrol engine of the passenger segment of the Subaru Corporation (Toyota владеет 20%) group (Япония, 1953). Stage 1 chip tuning raises power from 170 to 190 hp (+20 hp, +12%) and torque from 250 to 300 Nm (+50 Nm). A petrol engine built in 2015 — a Tricore platform without strong protection; OBD access works.
The WRX STI is Subaru's iconic rally model. Subaru is a Japanese carmaker specialising in flat engines and all-wheel drive. Subaru has a technical partnership with Toyota (the BRZ/GR86 is a shared model). On the naturally aspirated Subaru Boxer, Stage 1 delivers a modest gain. The WRX and WRX STI are the flagship of the brand's turbo segment. The EJ series (legacy) and the FA/FB series are Subaru's iconic Boxer engines.
The Subaru community in JDM and rally culture is the largest for the WRX/STI. Mid-range Subaru models use naturally aspirated Boxer engines with a conservative calibration.
Frequently asked questions
What is the Stage 1 effect on the Subaru Levorg 1.6 turbo 170 hp?
Stage 1 for the Subaru Levorg 1.6 turbo 170 hp adds +20 hp — power increases from 170 to 190 hp (+12%). Torque rises from 250 to 300 Nm (+50 Nm).
What does a Stage 1 remap of the Subaru Levorg 1.6 turbo 170 hp include?
Stage 1 on the Subaru Levorg 1.6 turbo 170 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 turbo 170 hp?
Stage 1 on the Subaru Levorg 1.6 turbo 170 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Subaru Levorg 1.6 turbo 170 hp?
Stage 2 for the Subaru Levorg 1.6 turbo 170 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Subaru Levorg?
Stage 1 on the Subaru Levorg voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Subaru Levorg 1.6 turbo 170 hp done?
The full remap cycle for the Subaru Levorg — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Subaru Levorg?
The original Subaru Levorg ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Subaru Levorg 1.6 turbo 170 hp?
The cost of Stage 1 for the Subaru Levorg 1.6 turbo 170 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.