Subaru Impreza 2.5T 224 hp — Stage 1 file (+43 hp)
hp
Stage 1 file for Subaru Impreza 2.5T 224 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Subaru Impreza 2.5T 224 hp ECU
Subaru Impreza (2008) 2.5T 224 hp — mass-market petrol engine of the passenger segment of the Subaru Corporation (Toyota владеет 20%) group (Япония, 1953). Stage 1 chip tuning raises power from 224 to 267 hp (+43 hp, +19%) and torque from 320 to 400 Nm (+80 Nm). In the CHIPOK database: 3 configurations. The 2008 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Subaru is a Japanese carmaker specialising in flat engines and all-wheel drive. Subaru has a technical partnership with Toyota (the BRZ/GR86 is a shared model). The boxer (flat) layout is Subaru's signature engine architecture. The WRX and WRX STI are the flagship of the brand's turbo segment. The EJ series (legacy) and the FA/FB series are Subaru's iconic Boxer engines. Subaru's petrol range comprises naturally aspirated and turbo flat engines.
The Subaru community in JDM and rally culture is the largest for the WRX/STI. On turbo Subaru engines, Stage 1 delivers a noticeable gain. High-output Subaru WRX models sit in the turbo segment, with solid headroom for Stage 1.
Frequently asked questions
How much does the power of the Subaru Impreza 2.5T 224 hp increase after Stage 1?
The Stage 1 gain for the Subaru Impreza 2.5T 224 hp is 43 hp (+19%) over the stock 224 hp, for a total of 267 hp. Torque rises from 320 to 400 Nm (+80 Nm).
What is Stage 1 chip tuning for the Subaru Impreza?
Stage 1 is a software optimization of the factory ECU firmware of the Subaru Impreza with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +43 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Subaru Impreza?
The high-output Subaru Impreza 2.5T 224 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Subaru Impreza 2.5T 224 hp?
Stage 2 on the Subaru Impreza 2.5T 224 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Subaru Impreza remain valid after Stage 1?
After remapping the Subaru Impreza, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Subaru Impreza?
Reading and writing via OBD takes 25-30 minutes on the Subaru Impreza. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Subaru Impreza?
Before Stage 1 the original of the Subaru Impreza 2.5T 224 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Subaru Impreza 2.5T 224 hp cost?
The remap price for the Subaru Impreza 2.5T 224 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.