Subaru BRZ 2.0i 200 hp — Stage 1 file (+12 hp)
hp
Stage 1 file for Subaru BRZ 2.0i 200 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Subaru BRZ 2.0i 200 hp ECU
Subaru BRZ (2012) 2.0i 200 hp — mass-market petrol engine of the passenger segment of the Subaru Corporation (Toyota владеет 20%) group (Япония, 1953). Stage 1 chip tuning raises power from 200 to 212 hp (+12 hp, +6%) and torque from 205 to 215 Nm (+10 Nm). The 2012 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
The boxer (flat) layout is Subaru's signature engine architecture. STI (Subaru Tecnica International) is the performance division that builds the WRX STI. Subaru uses permanent all-wheel drive (AWD) on most of its models. Subaru's petrol range comprises naturally aspirated and turbo flat engines. On the turbo WRX, Stage 1 delivers a confident gain. The WRX and WRX STI are the flagship of the brand's turbo segment.
The Subaru community in JDM and rally culture is the largest for the WRX/STI. On turbo Subaru engines, Stage 1 delivers a noticeable gain. High-output Subaru WRX models sit in the turbo segment, with solid headroom for Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Subaru BRZ 2.0i 200 hp?
After Stage 1 the power of the Subaru BRZ 2.0i 200 hp rises from 200 to 212 hp, a gain of 12 hp (+6%). Torque rises from 205 to 215 Nm (+10 Nm).
How does Stage 1 differ from stock on the Subaru BRZ?
Stage 1 on the Subaru BRZ 2.0i 200 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +12 hp with no hardware changes.
What does Stage 1 give on the powerful Subaru BRZ 2.0i 200 hp?
The high-output Subaru BRZ 2.0i 200 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Subaru BRZ 2.0i 200 hp?
Stage 2 on the Subaru BRZ 2.0i 200 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Subaru BRZ?
Stage 1 on the Subaru BRZ voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Subaru BRZ 2.0i 200 hp done?
The full remap cycle for the Subaru BRZ — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Subaru BRZ?
The original Subaru BRZ ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Subaru BRZ 2.0i 200 hp?
The cost of Stage 1 for the Subaru BRZ 2.0i 200 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.