Steyr Profi CVT 4130 4.5L 131hp (96kW) 590Nm — Stage 1 file (+31 hp)
hp
Stage 1 file for Steyr Profi CVT 4130 4.5L 131hp (96kW) 590Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Steyr Profi CVT 4130 4.5L 131hp (96kW) 590Nm ECU
Steyr Profi (I) CVT 4130 4.5L 131hp (96kW) 590Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Австрия, 1934). Stage 1 chip tuning raises power from 131 to 162 hp (+31 hp, +24%) and torque from 590 to 716 Nm (+126 Nm).
Steyr is an Austrian tractor manufacturer, founded in 1934. Steyr is part of CNH Industrial. Steyr specialises in tractors for Alpine regions. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 на агро-дизелях — заметный прирост момента для тяги. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Steyr среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How many horsepower does the Steyr Profi CVT 4130 4.5L 131hp (96kW) 590Nm reach after a remap?
The Stage 1 gain for the Steyr Profi CVT 4130 4.5L 131hp (96kW) 590Nm is 31 hp (+24%) over the stock 131 hp, for a total of 162 hp. Torque rises from 590 to 716 Nm (+126 Nm).
What is Stage 1 chip tuning for the Steyr Profi?
Stage 1 is a software optimization of the factory ECU firmware of the Steyr Profi with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +31 hp with no hardware changes.
What is the risk of Stage 1 on the Steyr Profi CVT 4130 4.5L 131hp (96kW) 590Nm?
A remap of the Steyr Profi CVT 4130 4.5L 131hp (96kW) 590Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Steyr Profi CVT 4130 4.5L 131hp (96kW) 590Nm?
Stage 2 on the Steyr Profi CVT 4130 4.5L 131hp (96kW) 590Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Steyr Profi remain valid after Stage 1?
After remapping the Steyr Profi, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Steyr Profi?
Reading and writing via OBD takes 25-30 minutes on the Steyr Profi. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Steyr Profi?
Before Stage 1 the original of the Steyr Profi CVT 4130 4.5L 131hp (96kW) 590Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Steyr Profi CVT 4130 4.5L 131hp (96kW) 590Nm cost?
The remap price for the Steyr Profi CVT 4130 4.5L 131hp (96kW) 590Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.