Steyr Multi 4115 3.4L 114hp (84kW) 457Nm — Stage 1 file (+28 hp)
hp
Stage 1 file for Steyr Multi 4115 3.4L 114hp (84kW) 457Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Steyr Multi 4115 3.4L 114hp (84kW) 457Nm ECU
Steyr Multi (I) 4115 3.4L 114hp (84kW) 457Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Австрия, 1934). Stage 1 chip tuning raises power from 114 to 142 hp (+28 hp, +25%) and torque from 457 to 466 Nm (+9 Nm).
Steyr is an Austrian tractor manufacturer, founded in 1934. Steyr is part of CNH Industrial. Steyr specialises in tractors for Alpine regions. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Сельхозсегмент — расход и тяга важнее л.с. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Steyr среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much horsepower does Stage 1 add for the Steyr Multi 4115 3.4L 114hp (84kW) 457Nm?
Stage 1 chip tuning on the Steyr Multi 4115 3.4L 114hp (84kW) 457Nm boosts engine output by 28 hp: from 114 to 142 hp. Torque rises from 457 to 466 Nm (+9 Nm).
What changes in the Steyr Multi ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Steyr Multi with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +28 hp with no hardware changes.
What is the risk of Stage 1 on the Steyr Multi 4115 3.4L 114hp (84kW) 457Nm?
A remap of the Steyr Multi 4115 3.4L 114hp (84kW) 457Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Steyr Multi 4115 3.4L 114hp (84kW) 457Nm?
Stage 2 for the Steyr Multi 4115 3.4L 114hp (84kW) 457Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Steyr Multi remain valid after Stage 1?
After remapping the Steyr Multi, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Steyr Multi?
Reading and writing via OBD takes 25-30 minutes on the Steyr Multi. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Steyr Multi?
Before Stage 1 the original of the Steyr Multi 4115 3.4L 114hp (84kW) 457Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Steyr Multi 4115 3.4L 114hp (84kW) 457Nm cost?
The remap price for the Steyr Multi 4115 3.4L 114hp (84kW) 457Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.