Steyr Kompakt 4095 3.4L 99hp (73kW) 407Nm — Stage 1 file (+26 hp)
hp
Stage 1 file for Steyr Kompakt 4095 3.4L 99hp (73kW) 407Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Steyr Kompakt 4095 3.4L 99hp (73kW) 407Nm ECU
Steyr Kompakt (I) 4095 3.4L 99hp (73kW) 407Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Австрия, 1934). Stage 1 chip tuning raises power from 99 to 125 hp (+26 hp, +26%) and torque from 407 to 508 Nm (+101 Nm).
Steyr is an Austrian tractor manufacturer, founded in 1934. Steyr is part of CNH Industrial. Steyr specialises in tractors for Alpine regions. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Маломощные Steyr — компактная техника; Stage 1 безопасный.
Frequently asked questions
How many horsepower does the Steyr Kompakt 4095 3.4L 99hp (73kW) 407Nm reach after a remap?
The Stage 1 gain for the Steyr Kompakt 4095 3.4L 99hp (73kW) 407Nm is 26 hp (+26%) over the stock 99 hp, for a total of 125 hp. Torque rises from 407 to 508 Nm (+101 Nm).
What is Stage 1 chip tuning for the Steyr Kompakt?
Stage 1 is a software optimization of the factory ECU firmware of the Steyr Kompakt with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +26 hp with no hardware changes.
Is Stage 1 worth doing on the base Steyr Kompakt?
Stage 1 on the base Steyr Kompakt is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Steyr Kompakt 4095 3.4L 99hp (73kW) 407Nm?
Stage 2 on the Steyr Kompakt 4095 3.4L 99hp (73kW) 407Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Steyr Kompakt remain valid after Stage 1?
After remapping the Steyr Kompakt, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Steyr Kompakt?
Reading and writing via OBD takes 25-30 minutes on the Steyr Kompakt. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Steyr Kompakt?
Before Stage 1 the original of the Steyr Kompakt 4095 3.4L 99hp (73kW) 407Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Steyr Kompakt 4095 3.4L 99hp (73kW) 407Nm cost?
The remap price for the Steyr Kompakt 4095 3.4L 99hp (73kW) 407Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.