Steyr Kompakt 4065 3.2L 65hp (48kW) 260Nm — Stage 1 file (+23 hp)
hp
Stage 1 file for Steyr Kompakt 4065 3.2L 65hp (48kW) 260Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Steyr Kompakt 4065 3.2L 65hp (48kW) 260Nm ECU
Steyr Kompakt (I) 4065 3.2L 65hp (48kW) 260Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Австрия, 1934). Stage 1 chip tuning raises power from 65 to 88 hp (+23 hp, +35%) and torque from 260 to 346 Nm (+86 Nm).
Steyr specialises in tractors for Alpine regions. Steyr is an Austrian tractor manufacturer, founded in 1934. Steyr is part of CNH Industrial. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Маломощные Steyr — компактная техника; Stage 1 безопасный.
Frequently asked questions
What power gain do you get after chip tuning the Steyr Kompakt 4065 3.2L 65hp (48kW) 260Nm?
After Stage 1 the power of the Steyr Kompakt 4065 3.2L 65hp (48kW) 260Nm rises from 65 to 88 hp, a gain of 23 hp (+35%). Torque rises from 260 to 346 Nm (+86 Nm).
How does Stage 1 differ from stock on the Steyr Kompakt?
Stage 1 on the Steyr Kompakt 4065 3.2L 65hp (48kW) 260Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +23 hp with no hardware changes.
Is Stage 1 safe for the low-output Steyr Kompakt 4065 3.2L 65hp (48kW) 260Nm?
Stage 1 on the base Steyr Kompakt is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How does Stage 2 differ from Stage 1 on the Steyr Kompakt 4065 3.2L 65hp (48kW) 260Nm?
Stage 2 on the Steyr Kompakt 4065 3.2L 65hp (48kW) 260Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Steyr Kompakt?
Stage 1 on the Steyr Kompakt voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Steyr Kompakt 4065 3.2L 65hp (48kW) 260Nm done?
The full remap cycle for the Steyr Kompakt — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Steyr Kompakt?
The original Steyr Kompakt ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Steyr Kompakt 4065 3.2L 65hp (48kW) 260Nm?
The cost of Stage 1 for the Steyr Kompakt 4065 3.2L 65hp (48kW) 260Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.