Steyr 4000serie 4110 112hp (82kW) 520Nm — Stage 1 file (+20 hp)
hp
Stage 1 file for Steyr 4000serie 4110 112hp (82kW) 520Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Steyr 4000serie 4110 112hp (82kW) 520Nm ECU
Steyr 4000serie (I) 4110 112hp (82kW) 520Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Австрия, 1934). Stage 1 chip tuning raises power from 112 to 132 hp (+20 hp, +18%) and torque from 520 to 577 Nm (+57 Nm).
Steyr is an Austrian tractor manufacturer, founded in 1934. Steyr is part of CNH Industrial. Steyr specialises in tractors for Alpine regions. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 на агро-дизелях — заметный прирост момента для тяги. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Steyr среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What power gain do you get after chip tuning the Steyr 4000serie 4110 112hp (82kW) 520Nm?
Stage 1 for the Steyr 4000serie 4110 112hp (82kW) 520Nm adds +20 hp — power increases from 112 to 132 hp (+18%). Torque rises from 520 to 577 Nm (+57 Nm).
What does a Stage 1 remap of the Steyr 4000serie 4110 112hp (82kW) 520Nm include?
Stage 1 is a software optimization of the factory ECU firmware of the Steyr 4000serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
What is the risk of Stage 1 on the Steyr 4000serie 4110 112hp (82kW) 520Nm?
A remap of the Steyr 4000serie 4110 112hp (82kW) 520Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Steyr 4000serie 4110 112hp (82kW) 520Nm?
Stage 2 for the Steyr 4000serie 4110 112hp (82kW) 520Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Steyr 4000serie remain valid after Stage 1?
After remapping the Steyr 4000serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Steyr 4000serie?
Reading and writing via OBD takes 25-30 minutes on the Steyr 4000serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Steyr 4000serie?
Before Stage 1 the original of the Steyr 4000serie 4110 112hp (82kW) 520Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Steyr 4000serie 4110 112hp (82kW) 520Nm cost?
The remap price for the Steyr 4000serie 4110 112hp (82kW) 520Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.