Steyr 4000serie 4100 101hp (74kW) 435Nm — Stage 1 file (+21 hp)
hp
Stage 1 file for Steyr 4000serie 4100 101hp (74kW) 435Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Steyr 4000serie 4100 101hp (74kW) 435Nm ECU
Steyr 4000serie (I) 4100 101hp (74kW) 435Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Австрия, 1934). Stage 1 chip tuning raises power from 101 to 122 hp (+21 hp, +21%) and torque from 435 to 518 Nm (+83 Nm).
Steyr specialises in tractors for Alpine regions. Steyr is an Austrian tractor manufacturer, founded in 1934. Steyr is part of CNH Industrial. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Steyr среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What power gain do you get after chip tuning the Steyr 4000serie 4100 101hp (74kW) 435Nm?
The Stage 1 gain for the Steyr 4000serie 4100 101hp (74kW) 435Nm is 21 hp (+21%) over the stock 101 hp, for a total of 122 hp. Torque rises from 435 to 518 Nm (+83 Nm).
What is Stage 1 chip tuning for the Steyr 4000serie?
Stage 1 on the Steyr 4000serie 4100 101hp (74kW) 435Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +21 hp with no hardware changes.
Is a Stage 1 remap safe for the 4100 101hp (74kW) 435Nm?
Stage 1 on the Steyr 4000serie 4100 101hp (74kW) 435Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Steyr 4000serie 4100 101hp (74kW) 435Nm?
Stage 2 on the Steyr 4000serie 4100 101hp (74kW) 435Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Steyr 4000serie?
Stage 1 on the Steyr 4000serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Steyr 4000serie 4100 101hp (74kW) 435Nm done?
The full remap cycle for the Steyr 4000serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Steyr 4000serie?
The original Steyr 4000serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Steyr 4000serie 4100 101hp (74kW) 435Nm?
The cost of Stage 1 for the Steyr 4000serie 4100 101hp (74kW) 435Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.