SsangYong Tivoli 1.6 e-XDI 115 hp — Stage 1 file (+25 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for SsangYong Tivoli 1.6 e-XDI 115 hp ECU

SsangYong Tivoli (2016) 1.6 e-XDI 115 hp — mass-market diesel engine of the passenger segment of the KG Mobility (с 2023) group (Корея, 1954). Stage 1 chip tuning raises power from 115 to 140 hp (+25 hp, +22%) and torque from 300 to 340 Nm (+40 Nm). A diesel built in 2016 — the Tricore ECU era; OBD flash works on most production revisions.

SsangYong is a Korean carmaker, founded in 1954. SsangYong has been owned by KG Mobility since 2023 (previously Mahindra). SsangYong specialises in off-roaders and SUVs. DPF/SCR with AdBlue is standard on Euro-6 diesels. On mid-range SsangYong diesels, Stage 1 is felt in the Nm figures. SsangYong runs its own diesels alongside Mercedes-sourced engines (XDi).

The SsangYong community is a niche one, centred on Korea and Eastern Europe. Mid-range SsangYong models take Stage 1 with reliability fully preserved.

Frequently asked questions

How much horsepower does Stage 1 add for the SsangYong Tivoli 1.6 e-XDI 115 hp?

Stage 1 for the SsangYong Tivoli 1.6 e-XDI 115 hp adds +25 hp — power increases from 115 to 140 hp (+22%). Torque rises from 300 to 340 Nm (+40 Nm).

What does a Stage 1 remap of the SsangYong Tivoli 1.6 e-XDI 115 hp include?

Stage 1 is a software optimization of the factory ECU firmware of the SsangYong Tivoli with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.

What is the risk of Stage 1 on the SsangYong Tivoli 1.6 e-XDI 115 hp?

A remap of the SsangYong Tivoli 1.6 e-XDI 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.

What is Stage 2 for the SsangYong Tivoli 1.6 e-XDI 115 hp?

Stage 2 for the SsangYong Tivoli 1.6 e-XDI 115 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.

Does the factory warranty of the SsangYong Tivoli remain valid after Stage 1?

After remapping the SsangYong Tivoli, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

How long is the wait for a Stage 1 remap for the SsangYong Tivoli?

Reading and writing via OBD takes 25-30 minutes on the SsangYong Tivoli. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

How do you roll back to the factory firmware of the SsangYong Tivoli?

Before Stage 1 the original of the SsangYong Tivoli 1.6 e-XDI 115 hp is read out and saved — returning to the factory state is possible at any time.

How much does chip tuning the SsangYong Tivoli 1.6 e-XDI 115 hp cost?

The remap price for the SsangYong Tivoli 1.6 e-XDI 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno