Skoda Yeti 1.4 TSI/TFSI 122 hp — Stage 1 file (+18 hp)
hp
Stage 1 file for Skoda Yeti 1.4 TSI/TFSI 122 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Yeti 1.4 TSI/TFSI 122 hp ECU
Skoda Yeti (2008) 1.4 TSI/TFSI 122 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 122 to 140 hp (+18 hp, +15%) and torque from 200 to 240 Nm (+40 Nm). This engine ships with different ECU variants: Bosch MED17.5.1, Bosch MED17.5.20, Bosch MED17.5.5. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The Temic DQ200 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 4 configurations · 4 ECU variants. The 2008 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. On older-generation petrol Skoda models, Stage 1 is done via OBD without bench.
On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life.
The DSG's TCU needs recalibration at Stage 1+. DSG comes in dry- and wet-clutch versions. The DSG is VAG's signature dual-clutch gearbox, fitted to Skoda models with transverse engines.
Frequently asked questions
How much does the power of the Skoda Yeti 1.4 TSI/TFSI 122 hp increase after Stage 1?
The Stage 1 gain for the Skoda Yeti 1.4 TSI/TFSI 122 hp is 18 hp (+15%) over the stock 122 hp, for a total of 140 hp. Torque rises from 200 to 240 Nm (+40 Nm).
What is Stage 1 chip tuning for the Skoda Yeti?
Stage 1 chip tuning of the Skoda Yeti is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +18 hp with no hardware changes.
Can you do Stage 1 on the Skoda Yeti 1.4 TSI/TFSI 122 hp?
Yes, Stage 1 for the Skoda Yeti 1.4 TSI/TFSI 122 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Skoda Yeti?
Stage 2 on the Skoda Yeti 1.4 TSI/TFSI 122 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Skoda Yeti 1.4 TSI/TFSI 122 hp?
The Skoda Yeti 1.4 TSI/TFSI 122 hp was fitted with different ECUs depending on the year and trim: Bosch MED17.5.1, Bosch MED17.5.20, Bosch MED17.5.5. The write method (OBD, Bench, Boot) is determined when the unit is read.
Is the Temic DQ200 TCU calibrated together with Stage 1?
Yes, on the Skoda Yeti 1.4 TSI/TFSI 122 hp the Temic DQ200 TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Skoda Yeti warranty after chip tuning?
The factory warranty of the Skoda Yeti does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Skoda Yeti take?
On the Skoda Yeti 1.4 TSI/TFSI 122 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Skoda Yeti?
Yes, the original ECU firmware of the Skoda Yeti 1.4 TSI/TFSI 122 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Skoda Yeti?
Stage 1 for the Skoda Yeti 1.4 TSI/TFSI 122 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.