Skoda Scala 1.6 TDI EU6 115 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Skoda Scala 1.6 TDI EU6 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Scala 1.6 TDI EU6 115 hp ECU
Skoda Scala (2019) 1.6 TDI EU6 115 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 115 to 145 hp (+30 hp, +26%) and torque from 250 to 310 Nm (+60 Nm). ECU — Delphi DCM6.2V. Flashing method: OBD or Bench depending on the unit's protection. The Temic DQ200 (MQB) TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A 2019 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
The Skoda community in Eastern Europe is one of the most active in chip tuning. Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. Mid-range Skoda diesels are a mainstream chip tuning subject across Europe.
On mid-range Skoda diesels, Stage 1 delivers a noticeable torque gain. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. Protection on modern Skoda RS models is tight, so Bench is required. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.
Tiptronic is the classic automatic for Skoda's top models. The DSG's TCU needs recalibration at Stage 1+. DSG comes in dry- and wet-clutch versions.
Frequently asked questions
What is the Stage 1 effect on the Skoda Scala 1.6 TDI EU6 115 hp?
Stage 1 for the Skoda Scala 1.6 TDI EU6 115 hp adds +30 hp — power increases from 115 to 145 hp (+26%). Torque rises from 250 to 310 Nm (+60 Nm).
What does a Stage 1 remap of the Skoda Scala 1.6 TDI EU6 115 hp include?
Stage 1 chip tuning of the Skoda Scala is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +30 hp with no hardware changes.
Can you do Stage 1 on the Skoda Scala 1.6 TDI EU6 115 hp?
Yes, Stage 1 for the Skoda Scala 1.6 TDI EU6 115 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Skoda Scala?
Stage 2 for the Skoda Scala 1.6 TDI EU6 115 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECU is fitted to the Skoda Scala 1.6 TDI EU6 115 hp?
The Skoda Scala 1.6 TDI EU6 115 hp ECU is the Delphi DCM6.2V. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
Is the Temic DQ200 (MQB) TCU calibrated together with Stage 1?
Yes, on the Skoda Scala 1.6 TDI EU6 115 hp the Temic DQ200 (MQB) TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Skoda Scala warranty after chip tuning?
The factory warranty of the Skoda Scala does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Skoda Scala take?
On the Skoda Scala 1.6 TDI EU6 115 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Skoda Scala?
Yes, the original ECU firmware of the Skoda Scala 1.6 TDI EU6 115 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Skoda Scala?
Stage 1 for the Skoda Scala 1.6 TDI EU6 115 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.