Skoda Scala 1.0 TSI/TFSI 95 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Skoda Scala 1.0 TSI/TFSI 95 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Scala 1.0 TSI/TFSI 95 hp ECU
Skoda Scala (2019) 1.0 TSI/TFSI 95 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 95 to 120 hp (+25 hp, +26%) and torque from 175 to 235 Nm (+60 Nm). This engine ships with different ECU variants: Bosch MED17.1.27, Bosch MED17.5.21. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern petrol engine built in 2019 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The Skoda range covers compacts, saloons, SUVs and family estates. The MQB platform allows ECU commonality with Volkswagen, Audi and Seat. The factory calibration of Skoda petrol engines is conservative, leaving headroom for Stage 1. Skoda shares ECUs and calibration algorithms with VW.
On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On naturally aspirated Skoda engines, the main effect is on throttle response. In the Skoda city segment, Stage 1 is more about comfort than outright power. On low-output Skoda engines, Stage 1 is safe without overstressing the hardware.
Frequently asked questions
What is the Stage 1 effect on the Skoda Scala 1.0 TSI/TFSI 95 hp?
The Stage 1 gain for the Skoda Scala 1.0 TSI/TFSI 95 hp is 25 hp (+26%) over the stock 95 hp, for a total of 120 hp. Torque rises from 175 to 235 Nm (+60 Nm).
What is Stage 1 chip tuning for the Skoda Scala?
Stage 1 chip tuning of the Skoda Scala is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +25 hp with no hardware changes.
What does chip tuning give on the low-output Skoda Scala 1.0 TSI/TFSI 95 hp?
Stage 1 on the base Skoda Scala is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How much does Stage 2 add on the Skoda Scala?
Stage 2 on the Skoda Scala 1.0 TSI/TFSI 95 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Skoda Scala 1.0 TSI/TFSI 95 hp?
The Skoda Scala 1.0 TSI/TFSI 95 hp was fitted with different ECUs depending on the year and trim: Bosch MED17.1.27, Bosch MED17.5.21. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Skoda Scala warranty after chip tuning?
The factory warranty of the Skoda Scala does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Skoda Scala take?
On the Skoda Scala 1.0 TSI/TFSI 95 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Skoda Scala?
Yes, the original ECU firmware of the Skoda Scala 1.0 TSI/TFSI 95 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Skoda Scala?
Stage 1 for the Skoda Scala 1.0 TSI/TFSI 95 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.