Skoda Roomster 1.2 TSI/TFSI 105 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Skoda Roomster 1.2 TSI/TFSI 105 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Roomster 1.2 TSI/TFSI 105 hp ECU
Skoda Roomster (2006) 1.2 TSI/TFSI 105 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 105 to 130 hp (+25 hp, +24%) and torque from 175 to 220 Nm (+45 Nm). This engine ships with different ECU variants: Bosch ME7.5.20, Siemens/Continental Simos10.11, Siemens/Continental Simos10.12, Siemens/Continental Simos10.x. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 6 configurations · 6 ECU variants. The 2006 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. The Skoda RS range is a performance sub-brand with turbo engines and 4x4.
On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
The DSG's TCU needs recalibration at Stage 1+. DSG comes in dry- and wet-clutch versions. The DSG is VAG's signature dual-clutch gearbox, fitted to Skoda models with transverse engines.
Frequently asked questions
What power gain do you get after chip tuning the Skoda Roomster 1.2 TSI/TFSI 105 hp?
The Stage 1 gain for the Skoda Roomster 1.2 TSI/TFSI 105 hp is 25 hp (+24%) over the stock 105 hp, for a total of 130 hp. Torque rises from 175 to 220 Nm (+45 Nm).
What is Stage 1 chip tuning for the Skoda Roomster?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Roomster with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Roomster 1.2 TSI/TFSI 105 hp?
A remap of the Skoda Roomster 1.2 TSI/TFSI 105 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Roomster 1.2 TSI/TFSI 105 hp?
Stage 2 on the Skoda Roomster 1.2 TSI/TFSI 105 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Skoda Roomster 1.2 TSI/TFSI 105 hp built with?
The Skoda Roomster 1.2 TSI/TFSI 105 hp comes with 4 ECU variants: Bosch ME7.5.20, Siemens/Continental Simos10.11, Siemens/Continental Simos10.12, Siemens/Continental Simos10.x. Calibration is done for the specific unit after the revision is identified.
Can all the gearbox variants (Temic DQ200 (MQB), Temic DQ200G2) on the Skoda Roomster be calibrated?
The Skoda Roomster 1.2 TSI/TFSI 105 hp has 2 TCU variants: Temic DQ200 (MQB), Temic DQ200G2. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Skoda Roomster remain valid after Stage 1?
After remapping the Skoda Roomster, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Roomster?
Reading and writing via OBD takes 25-30 minutes on the Skoda Roomster. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Roomster?
Before Stage 1 the original of the Skoda Roomster 1.2 TSI/TFSI 105 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Roomster 1.2 TSI/TFSI 105 hp cost?
The remap price for the Skoda Roomster 1.2 TSI/TFSI 105 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.