Skoda Roomster 1.2 HTP 70 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Skoda Roomster 1.2 HTP 70 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Roomster 1.2 HTP 70 hp ECU
Skoda Roomster (2006) 1.2 HTP 70 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 70 to 80 hp (+10 hp, +14%) and torque from 112 to 122 Nm (+10 Nm). The 2006 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The Skoda range covers compacts, saloons, SUVs and family estates. TSI is Skoda's petrol turbo engine designation, shared with VW and Audi.
On Skoda, Stage 1 usually fits within the standard turnaround time. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. On low-output Skoda engines, Stage 1 is safe without overstressing the hardware. On naturally aspirated Skoda engines, the main effect is on throttle response. In the Skoda city segment, Stage 1 is more about comfort than outright power.
Frequently asked questions
What is the Stage 1 effect on the Skoda Roomster 1.2 HTP 70 hp?
The Stage 1 gain for the Skoda Roomster 1.2 HTP 70 hp is 10 hp (+14%) over the stock 70 hp, for a total of 80 hp. Torque rises from 112 to 122 Nm (+10 Nm).
What is Stage 1 chip tuning for the Skoda Roomster?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Roomster with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +10 hp with no hardware changes.
Is Stage 1 worth doing on the base Skoda Roomster?
Stage 1 on the base Skoda Roomster is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Skoda Roomster 1.2 HTP 70 hp?
Stage 2 on the Skoda Roomster 1.2 HTP 70 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Skoda Roomster remain valid after Stage 1?
After remapping the Skoda Roomster, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Roomster?
Reading and writing via OBD takes 25-30 minutes on the Skoda Roomster. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Roomster?
Before Stage 1 the original of the Skoda Roomster 1.2 HTP 70 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Roomster 1.2 HTP 70 hp cost?
The remap price for the Skoda Roomster 1.2 HTP 70 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.