Skoda Rapid 1.6 TDI CR EU6 115 hp — Stage 1 file (+30 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Skoda Rapid 1.6 TDI CR EU6 115 hp ECU

Skoda Rapid (2012) 1.6 TDI CR EU6 115 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 115 to 145 hp (+30 hp, +26%) and torque from 250 to 310 Nm (+60 Nm). This engine ships with different ECU variants: Delphi DCM6.2V, Bosch EDC17C64, Bosch EDC17C74. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 5 configurations · 5 ECU variants. The 2012 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.

Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. Skoda is a high-volume chip tuning subject in Eastern Europe and among taxi fleets.

Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. On pre-2017 Skoda models, Stage 1 is done via OBD without bench. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life.

The DSG's TCU needs recalibration at Stage 1+. DSG comes in dry- and wet-clutch versions. The DSG is VAG's signature dual-clutch gearbox, fitted to Skoda models with transverse engines.

Frequently asked questions

What power gain do you get after chip tuning the Skoda Rapid 1.6 TDI CR EU6 115 hp?

The Stage 1 gain for the Skoda Rapid 1.6 TDI CR EU6 115 hp is 30 hp (+26%) over the stock 115 hp, for a total of 145 hp. Torque rises from 250 to 310 Nm (+60 Nm).

What is Stage 1 chip tuning for the Skoda Rapid?

Stage 1 chip tuning of the Skoda Rapid is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +30 hp with no hardware changes.

Can you do Stage 1 on the Skoda Rapid 1.6 TDI CR EU6 115 hp?

Yes, Stage 1 for the Skoda Rapid 1.6 TDI CR EU6 115 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.

How much does Stage 2 add on the Skoda Rapid?

Stage 2 on the Skoda Rapid 1.6 TDI CR EU6 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

Which ECUs are found on the Skoda Rapid 1.6 TDI CR EU6 115 hp?

The Skoda Rapid 1.6 TDI CR EU6 115 hp was fitted with different ECUs depending on the year and trim: Delphi DCM6.2V, Bosch EDC17C64, Bosch EDC17C74. The write method (OBD, Bench, Boot) is determined when the unit is read.

How many TCU units does the Skoda Rapid 1.6 TDI CR EU6 115 hp have?

The Skoda Rapid 1.6 TDI CR EU6 115 hp comes with 2 different automatic-transmission TCU units: Temic DQ200 (MQB), Temic DQ200G2. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.

What happens to the Skoda Rapid warranty after chip tuning?

The factory warranty of the Skoda Rapid does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.

How long does remapping the Skoda Rapid take?

On the Skoda Rapid 1.6 TDI CR EU6 115 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.

Is the original file kept when chip tuning the Skoda Rapid?

Yes, the original ECU firmware of the Skoda Rapid 1.6 TDI CR EU6 115 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.

What is the price of a Stage 1 remap for the Skoda Rapid?

Stage 1 for the Skoda Rapid 1.6 TDI CR EU6 115 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.

Last updated: 30.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno