Skoda Rapid 1.6 MPI 110 hp — Stage 1 file (+8 hp)
hp
Stage 1 file for Skoda Rapid 1.6 MPI 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Rapid 1.6 MPI 110 hp ECU
Skoda Rapid (2012) 1.6 MPI 110 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 110 to 118 hp (+8 hp, +7%) and torque from 155 to 165 Nm (+10 Nm). The 2012 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. The Skoda community in Eastern Europe is one of the most active in chip tuning. Skoda's slogan is “Simply Clever”. The Skoda RS range is a performance sub-brand with turbo engines and 4x4.
On mid-range standard Skoda petrol engines, Stage 1 delivers a noticeable gain. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. On pre-2017 Skoda models, Stage 1 is done via OBD without bench. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
Frequently asked questions
What is the Stage 1 effect on the Skoda Rapid 1.6 MPI 110 hp?
After Stage 1 the power of the Skoda Rapid 1.6 MPI 110 hp rises from 110 to 118 hp, a gain of 8 hp (+7%). Torque rises from 155 to 165 Nm (+10 Nm).
How does Stage 1 differ from stock on the Skoda Rapid?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Rapid with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +8 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Rapid 1.6 MPI 110 hp?
A remap of the Skoda Rapid 1.6 MPI 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Rapid 1.6 MPI 110 hp?
Stage 2 on the Skoda Rapid 1.6 MPI 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Skoda Rapid remain valid after Stage 1?
After remapping the Skoda Rapid, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Rapid?
Reading and writing via OBD takes 25-30 minutes on the Skoda Rapid. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Rapid?
Before Stage 1 the original of the Skoda Rapid 1.6 MPI 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Rapid 1.6 MPI 110 hp cost?
The remap price for the Skoda Rapid 1.6 MPI 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.