Skoda Rapid 1.5 TDI 105 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Skoda Rapid 1.5 TDI 105 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Rapid 1.5 TDI 105 hp ECU
Skoda Rapid (2012) 1.5 TDI 105 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 105 to 145 hp (+40 hp, +38%) and torque from 250 to 320 Nm (+70 Nm). A diesel built in 2012 — the Tricore ECU era; OBD flash works on most production revisions.
Skoda has historically shared platforms and engines with Volkswagen. Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. Mid-range Skoda diesels are a mainstream chip tuning subject across Europe.
On Skoda, Stage 1 usually fits within the standard turnaround time. On mid-range Skoda diesels, Stage 1 delivers a noticeable torque gain. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
Frequently asked questions
How much does the power of the Skoda Rapid 1.5 TDI 105 hp increase after Stage 1?
Stage 1 for the Skoda Rapid 1.5 TDI 105 hp adds +40 hp — power increases from 105 to 145 hp (+38%). Torque rises from 250 to 320 Nm (+70 Nm).
What does a Stage 1 remap of the Skoda Rapid 1.5 TDI 105 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Rapid with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Rapid 1.5 TDI 105 hp?
A remap of the Skoda Rapid 1.5 TDI 105 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Rapid 1.5 TDI 105 hp?
Stage 2 for the Skoda Rapid 1.5 TDI 105 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Skoda Rapid remain valid after Stage 1?
After remapping the Skoda Rapid, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Rapid?
Reading and writing via OBD takes 25-30 minutes on the Skoda Rapid. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Rapid?
Before Stage 1 the original of the Skoda Rapid 1.5 TDI 105 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Rapid 1.5 TDI 105 hp cost?
The remap price for the Skoda Rapid 1.5 TDI 105 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.