Skoda Rapid 1.4 TSI/TFSI 122 hp — Stage 1 file (+18 hp)
hp
Stage 1 file for Skoda Rapid 1.4 TSI/TFSI 122 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Rapid 1.4 TSI/TFSI 122 hp ECU
Skoda Rapid (2012) 1.4 TSI/TFSI 122 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 122 to 140 hp (+18 hp, +15%) and torque from 200 to 240 Nm (+40 Nm). This engine ships with different ECU variants: Bosch MED17.5.1, Bosch MED17.5.20, Bosch MED17.5.5. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The Temic DQ200 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 4 configurations · 4 ECU variants. A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. The Skoda community in Eastern Europe is one of the most active in chip tuning. The factory calibration of Skoda petrol engines is conservative, leaving headroom for Stage 1.
On pre-2017 Skoda models, Stage 1 is done via OBD without bench. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Skoda, Stage 1 usually fits within the standard turnaround time. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.
DSG comes in dry- and wet-clutch versions. The DSG is VAG's signature dual-clutch gearbox, fitted to Skoda models with transverse engines. Tiptronic is the classic automatic for Skoda's top models.
Frequently asked questions
How many horsepower does the Skoda Rapid 1.4 TSI/TFSI 122 hp reach after a remap?
Stage 1 chip tuning on the Skoda Rapid 1.4 TSI/TFSI 122 hp boosts engine output by 18 hp: from 122 to 140 hp. Torque rises from 200 to 240 Nm (+40 Nm).
What changes in the Skoda Rapid ECU after Stage 1?
Stage 1 on the Skoda Rapid 1.4 TSI/TFSI 122 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +18 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.4 TSI/TFSI 122 hp?
Stage 1 on the Skoda Rapid 1.4 TSI/TFSI 122 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Skoda Rapid 1.4 TSI/TFSI 122 hp?
Stage 2 for the Skoda Rapid 1.4 TSI/TFSI 122 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Skoda Rapid 1.4 TSI/TFSI 122 hp have?
The Skoda Rapid 1.4 TSI/TFSI 122 hp has 3 ECU variants: Bosch MED17.5.1, Bosch MED17.5.20, Bosch MED17.5.5. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does the Temic DQ200 transmission need calibration after Stage 1 on the Skoda Rapid?
Remapping the Temic DQ200 gearbox is essential to fully unlock Stage 1 on the Skoda Rapid 1.4 TSI/TFSI 122 hp. Without a TCU update the factory torque cap will choke the torque gain and shifts will become noticeably softer.
Does Stage 1 void the warranty on the Skoda Rapid?
Stage 1 on the Skoda Rapid voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Skoda Rapid 1.4 TSI/TFSI 122 hp done?
The full remap cycle for the Skoda Rapid — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Skoda Rapid?
The original Skoda Rapid ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Skoda Rapid 1.4 TSI/TFSI 122 hp?
The cost of Stage 1 for the Skoda Rapid 1.4 TSI/TFSI 122 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.