Skoda Rapid 1.2 TSI/TFSI 105 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Skoda Rapid 1.2 TSI/TFSI 105 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Rapid 1.2 TSI/TFSI 105 hp ECU
Skoda Rapid (2012) 1.2 TSI/TFSI 105 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 105 to 130 hp (+25 hp, +24%) and torque from 175 to 220 Nm (+45 Nm). This engine ships with different ECU variants: Bosch ME7.5.20, Siemens/Continental Simos10.11, Siemens/Continental Simos10.12, Siemens/Continental Simos10.x. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 6 configurations · 6 ECU variants. The 2012 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. The Skoda community in Eastern Europe is one of the most active in chip tuning. Skoda's slogan is “Simply Clever”. The Skoda RS range is a performance sub-brand with turbo engines and 4x4.
On mid-range standard Skoda petrol engines, Stage 1 delivers a noticeable gain. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. On pre-2017 Skoda models, Stage 1 is done via OBD without bench. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life.
The DSG is VAG's signature dual-clutch gearbox, fitted to Skoda models with transverse engines. Tiptronic is the classic automatic for Skoda's top models. The DSG's TCU needs recalibration at Stage 1+.
Frequently asked questions
What is the Stage 1 effect on the Skoda Rapid 1.2 TSI/TFSI 105 hp?
After Stage 1 the power of the Skoda Rapid 1.2 TSI/TFSI 105 hp rises from 105 to 130 hp, a gain of 25 hp (+24%). Torque rises from 175 to 220 Nm (+45 Nm).
How does Stage 1 differ from stock on the Skoda Rapid?
Stage 1 chip tuning of the Skoda Rapid is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +25 hp with no hardware changes.
Can you do Stage 1 on the Skoda Rapid 1.2 TSI/TFSI 105 hp?
Yes, Stage 1 for the Skoda Rapid 1.2 TSI/TFSI 105 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Skoda Rapid?
Stage 2 on the Skoda Rapid 1.2 TSI/TFSI 105 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Skoda Rapid 1.2 TSI/TFSI 105 hp?
The Skoda Rapid 1.2 TSI/TFSI 105 hp was fitted with different ECUs depending on the year and trim: Bosch ME7.5.20, Siemens/Continental Simos10.11, Siemens/Continental Simos10.12, Siemens/Continental Simos10.x. The write method (OBD, Bench, Boot) is determined when the unit is read.
How many TCU units does the Skoda Rapid 1.2 TSI/TFSI 105 hp have?
The Skoda Rapid 1.2 TSI/TFSI 105 hp comes with 2 different automatic-transmission TCU units: Temic DQ200 (MQB), Temic DQ200G2. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Skoda Rapid warranty after chip tuning?
The factory warranty of the Skoda Rapid does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Skoda Rapid take?
On the Skoda Rapid 1.2 TSI/TFSI 105 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Skoda Rapid?
Yes, the original ECU firmware of the Skoda Rapid 1.2 TSI/TFSI 105 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Skoda Rapid?
Stage 1 for the Skoda Rapid 1.2 TSI/TFSI 105 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.