Skoda Rapid 1.2 TSI S&S 90 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Skoda Rapid 1.2 TSI S&S 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Rapid 1.2 TSI S&S 90 hp ECU
Skoda Rapid (2012) 1.2 TSI S&S 90 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 90 to 130 hp (+40 hp, +44%) and torque from 160 to 220 Nm (+60 Nm). A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
The Skoda community in Eastern Europe is one of the most active in chip tuning. Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The Skoda RS range is a performance sub-brand with turbo engines and 4x4.
On pre-2017 Skoda models, Stage 1 is done via OBD without bench. On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. On low-output Skoda engines, Stage 1 is safe without overstressing the hardware. On naturally aspirated Skoda engines, the main effect is on throttle response. In the Skoda city segment, Stage 1 is more about comfort than outright power.
Frequently asked questions
What is the Stage 1 effect on the Skoda Rapid 1.2 TSI S&S 90 hp?
Stage 1 for the Skoda Rapid 1.2 TSI S&S 90 hp adds +40 hp — power increases from 90 to 130 hp (+44%). Torque rises from 160 to 220 Nm (+60 Nm).
What does a Stage 1 remap of the Skoda Rapid 1.2 TSI S&S 90 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Rapid with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.
Is Stage 1 worth doing on the base Skoda Rapid?
Yes, Stage 1 on the low-output Skoda Rapid 1.2 TSI S&S 90 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Skoda Rapid 1.2 TSI S&S 90 hp?
Stage 2 for the Skoda Rapid 1.2 TSI S&S 90 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Skoda Rapid remain valid after Stage 1?
After remapping the Skoda Rapid, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Rapid?
Reading and writing via OBD takes 25-30 minutes on the Skoda Rapid. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Rapid?
Before Stage 1 the original of the Skoda Rapid 1.2 TSI S&S 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Rapid 1.2 TSI S&S 90 hp cost?
The remap price for the Skoda Rapid 1.2 TSI S&S 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.