Skoda Rapid 1.2 TSI S&S 110 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Skoda Rapid 1.2 TSI S&S 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Rapid 1.2 TSI S&S 110 hp ECU
Skoda Rapid (2012) 1.2 TSI S&S 110 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 110 to 135 hp (+25 hp, +23%) and torque from 175 to 250 Nm (+75 Nm). This engine ships with different ECU variants: Bosch MED17.5.21, Bosch MED17.5.25, Siemens/Continental Simos20.1.20. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 5 configurations · 5 ECU variants. A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
The Skoda community in Eastern Europe is one of the most active in chip tuning. Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The factory calibration of Skoda petrol engines is conservative, leaving headroom for Stage 1.
On pre-2017 Skoda models, Stage 1 is done via OBD without bench. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Skoda, Stage 1 usually fits within the standard turnaround time. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.
Tiptronic is the classic automatic for Skoda's top models. The DSG's TCU needs recalibration at Stage 1+. DSG comes in dry- and wet-clutch versions.
Frequently asked questions
How many horsepower does the Skoda Rapid 1.2 TSI S&S 110 hp reach after a remap?
Stage 1 for the Skoda Rapid 1.2 TSI S&S 110 hp adds +25 hp — power increases from 110 to 135 hp (+23%). Torque rises from 175 to 250 Nm (+75 Nm).
What does a Stage 1 remap of the Skoda Rapid 1.2 TSI S&S 110 hp include?
Stage 1 on the Skoda Rapid 1.2 TSI S&S 110 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.2 TSI S&S 110 hp?
Stage 1 on the Skoda Rapid 1.2 TSI S&S 110 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Skoda Rapid 1.2 TSI S&S 110 hp?
Stage 2 for the Skoda Rapid 1.2 TSI S&S 110 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Skoda Rapid 1.2 TSI S&S 110 hp have?
The Skoda Rapid 1.2 TSI S&S 110 hp has 3 ECU variants: Bosch MED17.5.21, Bosch MED17.5.25, Siemens/Continental Simos20.1.20. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Which TCUs are found on the Skoda Rapid 1.2 TSI S&S 110 hp?
The Skoda Rapid 1.2 TSI S&S 110 hp was fitted with different automatic-transmission units: Temic DQ200 (MQB), Temic DQ200G2. All are supported via Bench reading; the Stage 1 calibration is done for the specific TCU after the revision is identified.
Does Stage 1 void the warranty on the Skoda Rapid?
Stage 1 on the Skoda Rapid voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Skoda Rapid 1.2 TSI S&S 110 hp done?
The full remap cycle for the Skoda Rapid — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Skoda Rapid?
The original Skoda Rapid ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Skoda Rapid 1.2 TSI S&S 110 hp?
The cost of Stage 1 for the Skoda Rapid 1.2 TSI S&S 110 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.