Skoda Octavia 2.0 TDI CR EU6 115 hp — Stage 1 file (+70 hp)
hp
Stage 1 file for Skoda Octavia 2.0 TDI CR EU6 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 2.0 TDI CR EU6 115 hp ECU
Skoda Octavia (2020) 2.0 TDI CR EU6 115 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 115 to 185 hp (+70 hp, +61%) and torque from 300 to 400 Nm (+100 Nm). A modern diesel built in 2020 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
The Skoda range covers compacts, saloons, SUVs and family estates. Skoda has historically shared platforms and engines with Volkswagen. Skoda is a high-volume VAG brand focused on practicality and affordable pricing. The factory calibration of Skoda diesels is conservative, leaving headroom for Stage 1.
Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. Protection on modern Skoda RS models is tight, so Bench is required. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
Frequently asked questions
What power gain do you get after chip tuning the Skoda Octavia 2.0 TDI CR EU6 115 hp?
After Stage 1 the power of the Skoda Octavia 2.0 TDI CR EU6 115 hp rises from 115 to 185 hp, a gain of 70 hp (+61%). Torque rises from 300 to 400 Nm (+100 Nm).
How does Stage 1 differ from stock on the Skoda Octavia?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Octavia with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +70 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Octavia 2.0 TDI CR EU6 115 hp?
A remap of the Skoda Octavia 2.0 TDI CR EU6 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Octavia 2.0 TDI CR EU6 115 hp?
Stage 2 on the Skoda Octavia 2.0 TDI CR EU6 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Skoda Octavia remain valid after Stage 1?
After remapping the Skoda Octavia, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Octavia?
Reading and writing via OBD takes 25-30 minutes on the Skoda Octavia. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Octavia?
Before Stage 1 the original of the Skoda Octavia 2.0 TDI CR EU6 115 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Octavia 2.0 TDI CR EU6 115 hp cost?
The remap price for the Skoda Octavia 2.0 TDI CR EU6 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.