Skoda Octavia 1.4 TSI e-HYBRID 204 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Skoda Octavia 1.4 TSI e-HYBRID 204 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 1.4 TSI e-HYBRID 204 hp ECU
Skoda Octavia (2020) 1.4 TSI e-HYBRID 204 hp — mass-market hybrid engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 204 to 229 hp (+25 hp, +12%) and torque from 350 to 400 Nm (+50 Nm).
Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The Skoda range covers compacts, saloons, SUVs and family estates. Skoda PHEV variants combine a TSI engine with an electric motor. On pure-EV Skoda models, the inverter and BMS are locked. The Skoda Enyaq iV is the flagship electric crossover, built on the VAG MEB platform.
On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. High-output Skoda engines are the RS range, with solid headroom for Stage 1. On Skoda RS models, Stage 1 works trouble-free on stock hardware.
Frequently asked questions
How much does the power of the Skoda Octavia 1.4 TSI e-HYBRID 204 hp increase after Stage 1?
The Stage 1 gain for the Skoda Octavia 1.4 TSI e-HYBRID 204 hp is 25 hp (+12%) over the stock 204 hp, for a total of 229 hp. Torque rises from 350 to 400 Nm (+50 Nm).
What is Stage 1 chip tuning for the Skoda Octavia?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Octavia with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Skoda Octavia?
The high-output Skoda Octavia 1.4 TSI e-HYBRID 204 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Skoda Octavia 1.4 TSI e-HYBRID 204 hp?
Stage 2 on the Skoda Octavia 1.4 TSI e-HYBRID 204 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Skoda Octavia remain valid after Stage 1?
After remapping the Skoda Octavia, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Octavia?
Reading and writing via OBD takes 25-30 minutes on the Skoda Octavia. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Octavia?
Before Stage 1 the original of the Skoda Octavia 1.4 TSI e-HYBRID 204 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Octavia 1.4 TSI e-HYBRID 204 hp cost?
The remap price for the Skoda Octavia 1.4 TSI e-HYBRID 204 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.