Skoda Octavia 1.0 TSI/TFSI 110 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Skoda Octavia 1.0 TSI/TFSI 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 1.0 TSI/TFSI 110 hp ECU
Skoda Octavia (2020) 1.0 TSI/TFSI 110 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 110 to 135 hp (+25 hp, +23%) and torque from 200 to 240 Nm (+40 Nm). In the CHIPOK database: 2 configurations. A 2020 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. The Skoda community in Eastern Europe is one of the most active in chip tuning. The Skoda RS range is a performance sub-brand with turbo engines and 4x4. The MQB platform allows ECU commonality with Volkswagen, Audi and Seat. The factory calibration of Skoda petrol engines is conservative, leaving headroom for Stage 1.
Protection on modern Skoda RS models is tight, so Bench is required. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Skoda, Stage 1 usually fits within the standard turnaround time. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Skoda Octavia 1.0 TSI/TFSI 110 hp reach after a remap?
Stage 1 chip tuning on the Skoda Octavia 1.0 TSI/TFSI 110 hp boosts engine output by 25 hp: from 110 to 135 hp. Torque rises from 200 to 240 Nm (+40 Nm).
What changes in the Skoda Octavia ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Octavia with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Octavia 1.0 TSI/TFSI 110 hp?
A remap of the Skoda Octavia 1.0 TSI/TFSI 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Octavia 1.0 TSI/TFSI 110 hp?
Stage 2 for the Skoda Octavia 1.0 TSI/TFSI 110 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Skoda Octavia remain valid after Stage 1?
After remapping the Skoda Octavia, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Octavia?
Reading and writing via OBD takes 25-30 minutes on the Skoda Octavia. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Octavia?
Before Stage 1 the original of the Skoda Octavia 1.0 TSI/TFSI 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Octavia 1.0 TSI/TFSI 110 hp cost?
The remap price for the Skoda Octavia 1.0 TSI/TFSI 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.