Skoda Octavia 1.6 TDI EU5 110 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Skoda Octavia 1.6 TDI EU5 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 1.6 TDI EU5 110 hp ECU
Skoda Octavia (2017) 1.6 TDI EU5 110 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 110 to 145 hp (+35 hp, +32%) and torque from 250 to 310 Nm (+60 Nm). This engine ships with different ECU variants: Bosch EDC17C64, Bosch EDC17C74. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 2 ECU variants. The 2017 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. The Skoda community in Eastern Europe is one of the most active in chip tuning. Skoda's slogan is “Simply Clever”. Mid-range Skoda diesels are a mainstream chip tuning subject across Europe.
Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. On pre-2017 Skoda models, Stage 1 is done via OBD without bench. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
What power gain do you get after chip tuning the Skoda Octavia 1.6 TDI EU5 110 hp?
After Stage 1 the power of the Skoda Octavia 1.6 TDI EU5 110 hp rises from 110 to 145 hp, a gain of 35 hp (+32%). Torque rises from 250 to 310 Nm (+60 Nm).
How does Stage 1 differ from stock on the Skoda Octavia?
Stage 1 on the Skoda Octavia 1.6 TDI EU5 110 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 TDI EU5 110 hp?
Stage 1 on the Skoda Octavia 1.6 TDI EU5 110 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Skoda Octavia 1.6 TDI EU5 110 hp?
Stage 2 on the Skoda Octavia 1.6 TDI EU5 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Skoda Octavia 1.6 TDI EU5 110 hp have?
The Skoda Octavia 1.6 TDI EU5 110 hp has 2 ECU variants: Bosch EDC17C64, Bosch EDC17C74. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Skoda Octavia?
Stage 1 on the Skoda Octavia voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Skoda Octavia 1.6 TDI EU5 110 hp done?
The full remap cycle for the Skoda Octavia — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Skoda Octavia?
The original Skoda Octavia ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Skoda Octavia 1.6 TDI EU5 110 hp?
The cost of Stage 1 for the Skoda Octavia 1.6 TDI EU5 110 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.